Virus Warning; Quick Power On Self Test - TYAN Trinity 100AT S1590 User Manual

Virus Warning

CPU Internal Cache
External Cache

Quick Power On Self Test

Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Boot Up System Speed
Gate A20 Option
Memory Parity/ECC Check
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
IDE Second Channel Control
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB
Virus Warning
When enabled, you receive a warning message if a program (specifically, a
virus) attempts to write to the boot sector or the partition table of the hard disk
drive. You should then run an anti-virus program. Keep in mind that this
feature protects only the boot sector, not the entire hard drive. Note: Many
disk diagnostic programs that access the boot sector table can trigger the virus
warning message. If you plan to run such a program, we recommend that you
first disable the virus warning.
CPU Internal Cache/External Cache
Cache memory is additional memory that is much faster than conventional
DRAM (system memory). CPUs from 486-type on up contain internal cache
memory, and most, but not all, modern PCs have additional (external) cache
memory. When the CPU requests data, the system transfers the requested data
from the main DRAM into cache memory, for even faster access by the CPU.
The External Cache field may not appear if your system does not have external
cache memory.
Quick Power On Self Test
Select Enabled to reduce the amount of time required to run the power-on self-
S1590 Trinity 100AT
ROM PCI/ISA BIOS (2A5LET59)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
: Disabled
: Enabled
: Enabled
: Disabled
: A, C, SCSI
: Disabled
: Enabled
: On
: High
: Normal
: Disabled
: Disabled
: 6
: 250
: Setup
: Enabled
: Disabled
: Non-OS2
41
Video BIOS Shadow : Enabled
C8000-CBFFF Shadow : Disabled
CC000-CFFFF Shadow : Disabled
D0000-D3FFF Shadow : Disabled
D4000-D7FFF Shadow : Disabled
D8000-DBFFF Shadow : Disabled
DC000-DFFFF Shadow : Disabled
ESC : Quit -¯ ®¬
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Select Item