Front panel controls
1
2
Standby/On
1
Switches the unit between a low power standby mode (indicated by dim power LED)
and on (indicated by bright power LED). Standby is a low power mode where the power
consumption is less than 3 Watts. The unit may be left in standby mode when not in
use.
2
Infrared sensor
Receive IR commands from the supplied remote control. A clear unobstructed line of
sight between the remote control and the sensor is required.
10
3
4
5
6
7
8
9
3
Phones
Allows for the connection of stereo headphones with a 3.5mm jack plug. Headphones
with an impedance of between 32 and 600 ohms are recommended.
Note: Plugging in headphones will automatically mute the loudspeaker output.
4
Source
Press to cycle through the available input sources such as TUNER, MP3, CD, DVD and
AUX inputs.
10
11