Cadillac Escalade Owner's Manual page 215

disc indicator, and
playback starts. If the disc
is inserted incorrectly, the
DVD player ejects the disc
and No Disc displays.
C. Level Lock and Release Latch
The viewing angle of the
video screen can be
adjusted by releasing the
latch and gently moving
the screen. Then lock it
into a secure position.
D. POWER
Press to turn the power on
or off. Each video screen
can be powered on or off
independently.
E. SOURCE
Press to select between
Monitor 3, Monitor 4, or the
AV INPUT.
Each video display screen
can be adjusted
independently, as well as
display information from
both DVD players and both
A/V inputs.
F. AV OUTPUT (Audio/Video
Output Jack)
Wired headphones or
video output can be
plugged in with a 3.5 mm
(1/8 in) jack to listen to
music or show the video
on another device.
G. Video Input
The yellow connector is
used for video input.
H. Left Audio Input
The white connector is
used for the left side audio.
I. Right Audio Input
The red connector is used
for the right side audio.
J. 3.5 mm (1/8 in) Output Jack
Wired headphones can be
plugged in with a 3.5 mm
(1/8 in) jack.
Infotainment System
K. PLAY
Press this button located
below the video display
screen to start playback of
a disc. On DVDs and video
CDs with playback
control (PBC), menu
screens can display
automatically. It might be
necessary to press the
play button again to
begin play.
There is a play position
memory feature for DVD
and video CD only. If the
DVD player is turned off
and then turned back on,
the DVD player resumes
playback where the disc
stopped. The play position
memory is erased if the
disc is removed.
7-33