Using Receive Modes; Fax Only; Fax/Tel; Manual - Brother MFC-7340 User Manual

Chapter 6

Using receive modes

Some receive modes answer faxes
automatically (Fax Only and Fax/Tel).
You may want to change the ring delay before
using these modes. (See Ring delay
on page 43.)

Fax Only

Fax Only mode will automatically answer
every call as a fax.

Fax/Tel

Fax/Tel mode helps you automatically
manage incoming calls, by recognising
whether they are fax or voice calls and
dealing with them in one of the following
ways:
Faxes will be automatically received.
Voice calls will start the F/T ring to tell you
to pick up the line. The F/T ring is a fast
double ring made by your machine.
Use this mode if you receive few voice
calls.
(Also see F/T ring time (Fax/Tel mode only)
on page 43 and Ring delay on page 43.)
42

Manual

6
Manual mode turns off all automatic
answering functions.
To receive a fax in Manual mode press Start
when you hear fax tones (short repeating
beeps). You can also use the Fax Detect
feature to receive faxes by lifting a handset on
the same line as the machine.
6
(Also see Fax Detect on page 43.)
If you use a computer modem on the same
line, faxing will not operate correctly.

External TAD

6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in the
following ways:
Faxes will be automatically received.
Voice callers can record a message on the
external TAD.
(For more information see Connecting an
external TAD on page 48.)
6
6