Setup To Receive Delayed Polling; Sequential Polling (Monochrome Only); Cancelling A Sequential Polling Job - Brother MFC-790CW User Manual

Chapter 11
Setup to receive delayed
polling
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a
Press (Fax).
b
Press d or c to display Polling RX.
c
Press Polling RX.
d
Press Timer.
e
Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
f
Enter the fax number you are polling
using Speed Dial or the dial pad on
the control panel.
g
Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling
(Monochrome only)
Sequential polling lets you request
documents from several fax machines in one
operation.
a
Press (Fax).
b
Press d or c to display Polling RX.
c
Press Polling RX.
d
Press Standard, Secure or Timer.
e
Do one of the following:
If you chose Standard, go to
step f.
If you chose Secure, enter a four-
digit number, press OK, go to step f.
If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step f.
86
f
Press d or c to display Broadcasting.
g
Press Broadcasting.
11
h
Do one of the following:
Press Add Number and enter a
number using a LCD buttons.
Press OK.
Press Speed Dial. Press a or b to
select a number.
Press OK.
i
After you have entered all the fax
numbers by repeating step h, press OK.
j
Press Mono Start.
The machine polls each number or
group in turn for a document.
Cancelling a Sequential
Polling Job
a
Press Stop/Exit.
b
Do one of the following:
To cancel the entire sequential
polling job, press
11
Entire Seq. Poll. Go to step c.
To cancel the current job, press the
button that displays the number
being dialled. Go to step d.
To exit without cancelling, press
Stop/Exit.
c
When the LCD asks if you want to
cancel the entire sequential polling job,
do one of the following:
Press Yes to confirm.
To exit without cancelling, press No
or Stop/Exit.
d
Do one of the following:
To cancel the current job, press Yes.
To exit without cancelling, press No
or Stop/Exit.
11