Loading Documents; Using The Adf; Using The Scanner Glass - Brother MFC-790CW User Manual

Loading documents

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.

Using the ADF

The ADF can hold up to 15 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
Recommended environment
Temperature: 20° C to 30° C
Humidity: 50% to 70%
Paper:
80 gsm
Document Sizes Supported
Length: 148 to 355.6 mm
Width: 148 to 215.9 mm
Weight:
64 to 90 gsm
How to load documents
CAUTION
DO NOT pull on the document while it is
feeding.
DO NOT use paper that is curled, wrinkled,
folded, ripped, stapled, paper clipped,
pasted or taped.
DO NOT use cardboard, newspaper or
fabric with the ADF. Instead use the
scanner glass.
Make sure documents are completely dry.
Loading paper and documents
a
Unfold the ADF Document Output
Support Flap (1).
2
b
Fan the pages well.
c
Adjust the paper guides to fit the width of
your documents.
d
Place your documents, face down, top
2
edge first in the ADF until you feel them
touch the feed roller.
2
CAUTION
DO NOT leave thick documents on the
2
scanner glass. If you do this, the ADF may
jam.

Using the scanner glass

2
You can use the scanner glass to fax, copy or
scan pages of a book one page at a time.
Document Sizes Supported
Length:
Width:
Weight:
1
Up to 297 mm
Up to 215.9 mm
Up to 2 kg
2
2
2
21