Pairing A Bluetooth ® Device - Bose WAVE SOUNDLINK Owner's Manual

English Tab 2, 10
Pairing a Bluetooth
To play music from your phone, tablet, computer, or other Bluetooth device, you will not need
®
the SoundLink USB key and should set it aside for now.
® ®
The Wave SoundLink
phone, tablet computer, or other Bluetooth enabled device.
1. Make SoundLink ®
®
Using the Wave SoundLink
button until SOUNDLINK appears on the Wave
and hold down the Presets 5 button for 5 seconds.
The indicator on the SoundLink
DISCOVERABLE flashes on the Wave
2. Select SoundLink ®
Turn on your phone, tablet computer, or other device and locate its Bluetooth device list.
Scroll through the device list and select "Bose SoundLink Audio".
3. Enter Passcode
If prompted for passcode, enter 0000. Some devices also ask you to accept the connection.
4. Complete Pairing
®
The Wave system emits a brief beep and SOUNDLINK appears on the display panel when
the connection is ready for use.
Note: To pair additional devices (up to 6), repeat steps 2-4 above.Only one device can be used at a
time.
Tab 3, 11 Tab 4, 12
device
®
adapter can wirelessly connect your Wave
Discoverable
®
remote control, press the SoundLink/AUX
® adapter flashes steadily and
®
system display panel.
from the Device List
Tab 5, 13 Tab 6, 14
®
system to your mobile
® system display panel. Press
Tab 7, 15 Tab 8, 16
13