Operation Selecting The Bose; For The Bose Solo 15 System; Pairing A Mobile Device - Bose Bluetooth Audio adapter Owner's Manual

Operation
Select the Bose
You may have to change the source input to the one the Bose
adapter is connected to on your audio system. Refer to your audio system owner's
guide for more information on selecting sources.
For the Bose
Ensure that your system software is up to date
(Go to worldwide.bose.com/soloupdates for software update instructions).
1.
On your remote, press and hold
emits a tone (a few seconds).
Your system switches to the Analog input, where the Bose
adapter is connected.
2.
Pair your mobile device. See "Pairing a mobile device" on page 10.
To exit the Bose
On your remote, press and hold
a tone (a few seconds). Your system returns to your previous source.

Pairing a mobile device

After you connect the adapter to power, the Bose
ready to pair with your device.
The Bluetooth indicator blinks blue.
1.
On your mobile device, turn Bluetooth on.
2. Select Bose Bluetooth Audio Adapter.
Bluetooth
Settings
Bluetooth
Devices
Bose Bluetooth
Audio Adapter
Note: Some devices may require a passcode. Enter 0000 if prompted.
When pairing is complete, the indicator glows solid white and your audio
system emits a tone.
Note: If you are unable to pair your device, clear the adapter's memory.
See "Adapter memory" on page 12.
10 - English
Bluetooth
®
Solo 15 system
®
Bluetooth Audio adapter source:
® ®
Connected
Audio adapter
®
until the LED flashes and your system
until the LED flashes and your system emits
Bluetooth
®
Bluetooth Audio
® ®
Bluetooth Audio
® ®
Audio adapter is
®