Initial Pairing - Bose BLUETOOTH HEADSET SERIES 2 Owner's Manual

English Tab 2, 8, 14 Tab 3, 9, 15 Tab 4, 10, 16

Initial pairing

1. Ensure the mobile phone is on and
®
Bluetooth
headset by sliding the power switch
to the On (green) position.
The Bluetooth indicator slowly
flashes blue to indicate the headset
is discoverable.
2. Locate the Bluetooth device list
on the mobile phone and select
Bose BT2.
3. If prompted for a passkey, enter
0000.
The Bluetooth indicator flashes,
then turns solid blue to indicate a
successful connection.
Additional pairing (up to 6 phones):
Press and hold Call for 5 seconds to
make the headset discoverable.Then repeat steps 2 to 3 above.
Note: If you have difficulty pairing, see "Troubleshooting", beginning
on page 21.
is enabled. Turn on the
Tab 5, 11
Bluetooth light
and symbol
Bluetooth
device list
Tab 6, 12
13