How The Air Conditioner Works; Sleep Mode; Timer Operation; Timer On - Frigidaire 66129904886 Use & Care Manual

SLEEP mode(Only for >12000 Btu's)
Press the sleep button to activate the
sleep mode. To deactivate, press the
button again.
In cooling mode:
In heating mode (only for models with
heating function):

TIMER Operation

TIMER button can set the auto-on time of the unit.
To set the starting time
Press the "TIMER ON" button to activate the auto start timer function .
1.
Auto start can be set from 0~24 hours. After pressing "TIMER ON" button,
"ON" on the display will blink, and
adjusted by pressing
increased or decreased,but
the value will be increased or decreased automalically ,and after 10 minutes
increase or decreased, the value will be changed 10 minutes every 0.5 second;
Press the "TIMER ON" button to conform the time.
when repressing the "TIMER ON" button , the "TIMER ON" setting will be
2.
canceled.

How the air conditioner works

35
during
"+" "-" button.
Every press of this button,1 minute will be
or
press the
continuously
2 °F
1 hour 1 hour
SLEEP FUNCTION (Cooling mode)
2 °F
2 °F
1 hour 1 hour
SLEEP FUNCTION (Heating mode)
5 seconds blinking ,the value can be
"-"
"+"
or button,
2 °F
7 hours
7 hours
2
seconds later