Making Settings In The "Display" Menu; Making Settings In The "Volume" Menu; Making Settings In The "Clock" Menu - Blaupunkt Cupertino 220 Operating And Installation Manual

Making settings in the "DISPLAY"
menu
DIM
Select automatic or manual switching of the dis-
play brightness for day or night. Settings: AUTO
(display brightness is automatically switched by
switching the driving lights on or off ), MAN (dis-
play brightness can be switched manually).
u Turn the volume control
setting.
Automatic switching of the display brightness is
possible only If your car sound system is installed
as described in the installation instructions and
your vehicle features the corresponding connec-
tion.
SCROLL
Select the display of scrolling text (e. g. when
displaying MP3 fi le names) either as single display
or continued display. Settings: 1X (single display),
ON (continued display).
u Turn the volume control
tween the settings.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: ON VOL
(power-on volume; 1 – 50) or LAST VOL (volume
set last before switching off the car sound system).
Danger!
High volume
The power-on volume can be unex-
pectedly high if the LAST VOL setting is selected
and a high volume was set the last time the radio
was switched off .
Always set the device to a moderate volume.
u Press the
button
u Press the
/ button
the settings LAST VOL and ON VOL.
4
to perform the
4
to change be-
7
to open the menu.
7
to toggle between
u If necessary, turn the volume control
adjust the desired volume for the ON VOL
setting.
TA VOL (traffi c announcement volume)
(only for reception area EUROPE)
Setting the minimum volume for traffi c announce-
ments. Settings: 1 – 50.
u Turn the volume control
setting.
BEEP
Switching the confi rmation beep on or off . Set-
tings: ON, OFF.
u Turn the volume control
setting.
Making settings in the "CLOCK"
menu
PERCLK
Switch the permanent display of the time on or off .
Settings: ON, OFF.
u Turn the volume control
setting.
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
H-MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
u Turn the volume control
setting.
SET
Setting the time.
u Turn the volume control
to set the hours.
u Turn the volume control
the minutes.
User settings
4
to
4
to perform the
4
to perform the
4
to perform the
4
to perform the
4
counterclockwise
4
clockwise to set
17