Setting The Sensitivity Of Station Seek Tuning; Browsing Through Broadcasting Networks (Only Fm); Storing Stations Manually; Storing Stations Automatically (Travelstore) - Blaupunkt Nashville DAB35 Operating Instructions Manual

If a radio station provides several pro-
grammes, you have the option of
browsing through its so-called "broad-
casting network".
Note:
The RDS function must be activat-
G
ed before you can use this feature.
➮
Press the or
switch to the next station on the
broadcasting network.
Note:
When using this feature, you will
G
only be able to switch to stations
that you have received once be-
fore already. To receive the sta-
tions, use the Scan or Travelstore
function.
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak
reception.
➮
Press the MENU•OK button 7.
"TUNER MENU" appears on the dis-
play.
➮
Press the MENU•OK button 7 to
display the tuner menu.
➮
Press the or
repeatedly until "SENS" appears
on the display.
The display shows the currently set
sensitivity level. "SENS HI3" means that
88
button 6 to
button 6
the tuner is set to the highest sensitiv-
ity setting. "SENS LO1" means it is set
to the lowest sensitivity setting.
➮
Set the sensitivity level that you
want using the
When you have finished making your
changes,
➮
press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Note:
You can set different sensitivity
G
levels for FM and MW or LW (AM).
➮
Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮
Tune into the station that you
want.
➮
Press and hold down one of the
station buttons 1 - 5 :, for longer
than two seconds to assign the
station to that button.
You can automatically store the five
stations offering the strongest recep-
tion in the region (only FM). The sta-
tions are stored in the FMT memory
bank.
Note:
Any stations that were previously
G
stored in this memory bank are
deleted in the process.
buttons 6.