Configuring The Level Display; External Audio Sources; Switching The Aux Input On/Off - Blaupunkt Kingston MP35 Operating Instructions Manual

LEVEL DISPLAY
Configuring the level
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
When you are not changing any set-
tings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
Press the MENU button 7.
"MENU" appears in the display.
Press the or
edly until "PEAK LVL" appears in
the display.
Press the or
switch between "PEAK ON" and
"PEAK OFF".
When you have finished adjusting the
setting,
press the MENU button 7 twice.
button 6 repeat-
button 6 to

EXTERNAL AUDIO SOURCES

External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Note:
If no CD changer is connected, the
AUX input must be activated in the
menu.

Switching the AUX input on/off

Press the MENU button 7.
"MENU" appears in the display.
Press the
edly until "AUX OFF" or "AUX ON"
appears in the display.
Press the
switch AUX on/off.
When you have finished adjusting the
setting,
press the MENU button 7.
Note:
If the AUX input is activated, you
can select it by pressing the SRC
button ;. "AUX INPUT" then ap-
pears in the display.
button 6 repeat-
or
button 6 to
or
67