Audio Operation - Blaupunkt Phoenix CM 127 Operating Instructions Manual

Audio operation

Volume control buttons
Press + and – to increase/decrease the volume from 0 to 63.
Adjustable maximum turn-on volume
Press and hold the ON button for more than two seconds. The unit turns off and the turn-on
volume level is memorized.
Mute
Press to temporarily reduce the volume. "MUTE" appears. Mute is terminated by pressing any
button.
Bass, treble, balance and fader
• Bass
Hold down the AUDIO button until "BASS" appears and then press immediately + or – to
increase or decrease the bass in intervals between 7 and -7.
• Treble
Hold down the AUDIO button until "BASS" appears. Then press AUDIO once again so that
"TREb" appears. Now press immediately + or – to increase or decrease the treble in
intervals between 7 and -7.
• Balance
Hold down the AUDIO button until "BASS" appears. Then press AUDIO twice so that "BAL"
appears. Now press immediately + or – to adjust the left/right volume between 9 (left) and -9
(right).
• Fader
Hold down the AUDIO button until "BASS" appears. Then press AUDIO three times so that
"FADE" appears. Now press immediately + or - to adjust the front/rear volume between 9
(front) and -9 (rear).
Loudness
Press LD to boost the low frequencies for a more natural sound. The "LOUD" icon appears. To
cancel, press LD again.