Front-Aux Input At The Front Of The Device; Technical Data; Input Sensitivity - Blaupunkt London MP48 Operating And Installation Manual

External audio sources
Switching the REAR-AUX input on/off
u Press the MENU•OK button 5.
u
Press the or
ly until "AUX OFF" or "AUX ON" appears
on the display.
u
Press the or
AUX ON or OFF.
After fi nishing the setting,
press the ESCAPE button <.
u
FRONT-AUX input at the front of
the device
Danger!
Increased risk of injury from con-
nector
In case of an accident, the protruding con-
nector in the FRONT-AUX-IN socket may
cause injuries. The use of straight plugs or
adapters can lead to an increased risk of
injury.
For this reason, we recommend using an-
gled jack plugs, e.g. the Blaupunkt acces-
sories cable (7 607 001 535).
As soon as an audio source is connected to
the FRONT-AUX-IN socket, it can be select-
ed with the SRC button 2. "FRONT AUX"
then appears on the display.
66
button 4 repeated-
button 4 to switch

Technical data

Amplifi er
Output power:
Tuner
Wavebands:
FM:
MW:
LW :
FM frequency response:
CD
Frequency response:
Pre-amp out
4 channels:

Input sensitivity

AUX input:
Tel./Navi input:
Weight
approx. 1.36 kg
Subject to changes
Technical data
4 x 18 watts sine
at 14.4 V and 1%
distortion factor at
4 ohms.
4 x 26 watts sine
in accordance with
DIN 45324 at 14.4 V
at 4 ohms.
4 x 50 watts max.
power
87.5 - 108 MHz
531 - 1 602 kHz
153 – 279 kHz
35 - 16,000 Hz
20 - 20,000 Hz
2 V
2 V / 6 kΩ
10 V / 1 kΩ