Handset Display Icons And Symbols - Binatone iDECT M3i User Manual

3.2 Display Icons and Symbols
The LCD display gives you information on the current status of the telephone.
Steady when the handset is in range of the base. Flashes when out of
range of the base or not registered to the base.
Steady when an intercom call is in progress.
Flashes when there is an incoming internal call.
Indicates a call is in progress on that handset.
Indicates that Speakerphone is being used.
Indicates that your answering machine (TAM) is
on and flashes when there is a new message.
Indicates that the handset ringer is switched off.
Steady when an alarm is set. Flashes when the alarm is sounding.
Indicates that the keypad is locked.
Indicates when you have a new Voice Mail message.
(This is a Caller Display service and is not usually available from
UK network providers.)
Whole icon on steady when the battery is fully charged, even if still on
a charging station.
Whole icon flashes when the battery is charging.
Indicates when the battery needs charging.
Flashes when low battery power level is detected.
Indicates when there are more characters or numbers in front of those
being displayed.
Indicates when there are more characters or numbers after those being
displayed.
LEFT SOFT KEY function. Press to access the main menu.
LEFT SOFT KEY function. Press to confirm the current selection.
Indicates new TAM message / new call in TAM message list / call list.
Indicates more options available in lists, above or below.
RIGHT SOFT KEY function. Press to start an intercom call.
(INT)
RIGHT SOFT KEY function. Press to go back to the previous menu level
or cancel the current action.
(BACK)
RIGHT SOFT KEY function. Press to clear a character, stop the alarm,
or mute/unmute the microphone during a call.
7