Registration; Reset Your Phone - Binatone iDECT M3i User Manual

3. Press <MENU/OK> and
4. Enter the old system PIN.
5. Press <MENU/OK>
system PIN.
6. Press <MENU/OK> to display CONFIRM?------, and enter your new 4-digit
system PIN again.
Note: If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5, you must enter the new system PIN at step 5 again.
again,
7. Press <MENU/OK> to confirm
7.5

Registration

IMPORTANT: When you purchase your phone system, all handsets are
already registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
You can register additional handsets to have up to five handsets per base unit,
with each handset's number (1 to 5) shown on its display. (Note: each handset
can only be registered to one base.)
To register a new handset to your base:
1. Press and hold <FIND> on the base station for more than five seconds, until
the base beeps to put the base station into registration
registration mode for about 1 minute, so the following handset sequence
must be completed within this time.
2. Press <MENU/OK> and <UP/DOWN> to select REGISTRATION.
3. Press <MENU/OK>
4. Enter the 4-digit system PIN(default0000).
5. Press <MENU/OK> to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and
the <antenna icon> will stop flashing.
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
handset registration is unsuccessful, the <antenna icon> will still flash.
7.6

Reset Your Phone

You can reset your phone to the default settings . After a reset, all your
personal settings, call list entries, redial list entries, and answering machine
messages will be deleted but your phonebook remains
1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT.
2. Press <MENU/OK>
3. Enter the 4-digit system PIN(default 0000).
4. Press <MENU/OK> to display CONFIRM?
5. Press <MENU/OK> to confirm, and the phone will be reset to its default
settings.
the display shows
to display NEW PIN?------, and enter your new 4-digit
to display PIN?------.
to display PIN?-----.
24
PIN?------
mode. It will stay in
unchanged.