Larm; Alarm Time - Binatone Speakeasy Combo 3865 Twin User Manual

Alarm Settings
7.2
You can set an alarm time on the cordless handset. When an alarm is set,
the < > is shown on the handset display.
When the alarm time is reached, the <
handset display, and the alarm tone rings for 45 seconds. You can press any
key to disable the alarm. If the snooze function is activated, the alarm will
sound again at the end of the snooze period of 7 minutes.You can also press
and hold <TALK OFF> while the alarm is sounding, to stop the alarm and
turn off the snooze function.
Note:
a. A key press will still disable the alarm even if the handset keypad is
locked when the alarm rings.
b. The alarm volume level is the same as the settings of the handset ringer
volume. If the handset ringer is set to OFF, the alarm still sounds at
VOLUME 1 level.
c. During an external call or internal call, if an alarm is set and when the
alarm time is reached, the <
alarm tone will be emitted from the earpiece to alert the user the alarm
time is reached. Once the user presses any key or presses and holds
<TALK OFF> to disable the alarm, the display will revert to the call
duration .
d. During paging or ringing, the alarm will not sound when the alarm time
is reached. However, if the snooze function is enabled and there is no
paging or ringing, the alarm will sound again at the end of the snooze
period.
Turn on/off the Alarm
7.2.1
1. Press <MENU/OK> and <UP/DOWN> to select ALARM .
2. Press <MENU/OK> and <UP/DOWN> to show ON or OFF .
3. Press <MENU/OK> to confirm your choice.
Note: If ON is selected, you will be prompted to set the alarm time.
Set the AlarmTime (if the Alarm is set to be ON)
7.2.2
1. Follow Steps 1 to 3 in Section 7.2.1.
2. Enter the alarm time in 24 hour format.
3. Press <MENU/OK> to display SNOOZE.
4. Press <MENU/OK> and <UP/DOWN> to show ON or OFF.
5. Press <MENU/OK> to confirm your setting.
> and "ALARM ON " flash on the
> and "ALARM ON " will still flash. An
39