Redial List; R Edial N Umber Into The P Honebook; Redial List Entrie; C Ordless H Andset - Binatone Speakeasy Combo 3865 Twin User Manual

4.19
Redial
You can redial any of the last 10 numbers called. If you have stored a name
in the phonebook to go with the
4.19.1 Redial a Number from the Redial List
1. In idle mode, press <DOWN / REDIAL> to view the redial list.
Note: the redial list can also be viewed using <MENU> then selecting
CALL LOG and DIALED.
2. Press <UP/DOWN> to browse the redial list.
3. Pick up the corded handset or press <SPEAKERPHONE> to dial the
selected redial number.
Note: If no numbers are in the redial list, the display will show "EMPTY".
4.19.2 Save a Redial Number into the Phonebook
1. Follow steps 1 and 2 in section 4.19.1.
2. Press <MENU/OK> to show ADD TO PB?
3. Press <MENU/OK> and then enter the name for the phonebook entry.
4. Press <MENU/OK> and then modify the number, if necessary.
5. Press <MENU/OK> and then <UP/DOWN> to select a melody.
Note: The selected melody will only play when you receive a call if you
subscribe to Caller Display and the incoming number matches the
stored number.
6. Press <MENU/OK> to save the redial number into the phonebook.
4.19.3 Delete a Redial Number
1. Follow steps 1 and 2 in section 4.19.1.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE? .
3. Press <MENU/OK> to show CONFIRM?
4. Press <MENU/OK> to confirm the delete.
4.19.4 Delete All Redial List Entries
1. In idle mode, press <DOWN / REDIAL> to open the redial list.
2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL?.
3. Press <MENU/OK> to show CONFIRM?
4. Press <MENU/OK> to confirm the delete, and briefly display EMPTY.
4.20
Find the Cordless Handset
You can locate any cordless handsets by paging from the base unit:
1. In idle mode, press <MENU/OK> and <UP/DOWN> to select
PAGE ALL HS.
2. Press <MENU/OK>. "PAGING" will flash on the base screen.
All handsets registered to the base will produce the paging tone and
"PAGING" flashes on the screen. You can stop the paging by pressing
<TALK> / <OFF> / <C/MUTE> on any handset or <C/MUTE> on the
base to stop paging.
number, the name will be displayed as well.
26