Address Book; Add An Entry - Binatone R430 User Manual

Each recording will be logged with the following information.
Viewing a trace record: Select the trace record you want to view. The currently selected trace
record will be highlighted blue. Then use the
When active the button will then change to show
slightly opaque line with green arrows indicating the direction of travel.
Note: it is only possible to show one trace at a time. A trace record which is been shown will be
shown with a blue highlight on the list. If you select a second Trace and tap
the first trace and begin to show this trace instead.
To delete a trace record, highlight it so that it is blue and tap

8.4 Address Book

Opens the address book screen, from here you
can add, edit, delete and view your address
book locations on the map. You can add address
book entries to the address book so that they
can quickly be used for navigation purposes.
Any previously entered address book entries will
be shown as a list.

8.4.1 Add an Entry

To add an entry to the address book, tap
of the options available when entering a destination under the Go to section (see page 19).
button to view the trace record on the map.
. The trace record will be shown as a
. You will now be able to add a location using all
Once you have added a location to the
address book you can enter further information
about that location. To enter further information
tap on the white box next to the field name, the
screen will change to show a keyboard which
allows you to enter information. Tap
confirm the entered text. Tap
point to return to the previous screen.
31
NAVIGATION
, this will cancel
.
at any
to