Table of Contents
Advertisement
2 Getting Started
Please make sure that the battery in your device is charged (see page 7).
Switch on the unit and from the menu select Navigation. The navigational software will start to load.
First you will see the warning statement screen. Tap
on "Accept" to confirm that you have read the
statement and to continue. If you do not wish to be
shown this screen in the future check the box next to
"Don't show this statement again". You will now be
shown the Binatone screen, which shows the progress
of the loading software on the yellow bar at the bottom.
In order to enter destinations and access the many
settings of the navigational software, tap Menu. This
will then take you to the Free Navi Menu screen.
You can choose from the 3 following options;
Go to – Opens the Search Menu screen. From here
you can select a point to navigate to.
Map Options – Allows you change the way the map
looks and behaves during navigation.
Settings – Allows access to the main settings menu
of the unit, which you can set to your personal
preference.
- Tap to return to the Free Navigation mode
- Tap to exit Navigation. You will be asked to confirm if you wish to exit, tap Yes to
exit, tap No to cancel and return to the Free Navi Menu.
- Returns you to either the Free Navigation screen or Route Navigation screen if a
route has been planned. This option is always available when not on any Navigation
screen.
3 Navigational Map Screens
The navigational map screens will be the most frequently used screens. The two navigation
screens are free navigation and route navigation and are shown below. Though the screens look
very similar there are some differences.
Once the
software has loaded you will be shown the Free
Navigation Menu screen, this is the starting point for all
your navigating needs.
For more information on free navigation mode (see
page 17).
17
NAVIGATION
Advertisement
Table of Contents
