Empty Collection Tank - Bissell CLEANVIEW QUICKWASH 90D3 SERIES User Manual

0
perations

empty collection tank

1. Turn power switch off and unplug power
cord from outlet.
2. Remove and empty collection tank.
Release collection tank latches [1 each
a.
side] by pulling up from bottom of latch
and then out.
Carefully remove collection tank from
b.
lower body by lifting handle.
Carry collection tank to a toilet or sink. To
c.
empty, pour out contents using opening at
back of tank.
Rinse collection tank thoroughly.
d.
Remove vent cover from top of collection
e.
tank by pulling the tab on top and pulling
up. Remove foam filter from vent cover.
Rinse filter thoroughly and replace back
into vent cover. Replace vent cover back
into collection tank, making sure the tab
clicks back into the locked position.
3. Remove lint and hair from red gasket in
base of unit. (do not remove gasket)
4. Clean nozzle window by lifting latch
and removing from machine. Rinse under
running water. When finished replace
nozzle and secure with latch.
5. Replace collection tank on base of unit and
secure with latches.
w w w . b i s s e l l . c o m
2a.
2c.
3
2b.
2e.
4
7