4Mm Lap Seam Foot # 70; Embroidery Foot # 6 - Bernina Accessories At-A-Glance Reference Manual

18

4mm lap seam foot # 70

70 002 954 72 00 A
70 008 488 72 00
B C D D1 E E1 F F1 G H
8mm lap seam foot # 71
71 002 973 72 00 A
71 008 489 72 00 B C D D1 E E1 F F1 G H

Embroidery foot # 6

6 002 581 71 00 A
6 008 451 72 00 B C D D1 E E1 F F1 G H
| P res ser feet fo r gen era l sew in g
For easy, precise sewing of lapped or flat-felled
seams. Since both seam allowances are enclosed and
stitched into the seam, it is also suitable for reversible
garments. Lapped or jeans seams are especially suit-
able for straight seams such as side seams and yokes,
but can also be used for slightly curved seams.
Foot # 70 is suitable for lightweight fabrics, while
foot # 71 is suitable for medium-weight fabrics.
This foot is suitable for all satin stitching. The wedge-
shaped cutout under the sole allows the foot to ride
smoothly over the satin stitches, and is high enough
that the sewn stitches are not pressed flat. The short
toes are especially helpful when sewing curves.
The small hole in the centre-front of the foot acts as
a guide for couching a narrow cord, elastic thread,
or several threads, but can also be used as a visual
guide.
1
2
1 Channel
2 Needle opening
1
2
3
1 Indentation
2 Needle opening
3 Hole for cord