General Cleaning Instructions - Baumatic BO638SS Instruction Manual

o During pyrolytic cleaning, the oven light will not switch on.
o After the set time period has elapsed, the oven door will remain
locked until the oven temperature has fallen below 300°C.
o When the oven has reached a warm temperature, you should
use a soft damp cloth to wipe out the resultant ash deposits. For
best cleaning results, you should not allow the oven to get
completely cold before wiping away the ash deposits.
o When the pyrolytic cleaning cycle has completed, the oven will
switch off and an alarm will sound. The auto function symbol will
flash and the heating symbol will disappear.
o To silence the audible signal and return the oven to manual
operation mode press the manual operation button. The auto
function symbol will disappear from the display and the manual
operation symbol will appear instead.
o Important: If you do not turn the thermostat control knob and
oven function selector knob to 0. Then the appliance will
continue to operate as soon as you press the manual operation
button.
o Important: Please note that you should not attempt to open the
door, until the light underneath the key symbol on the control
panel goes out.
General cleaning information
o Never clean any of the oven surfaces by steam cleaning.
o Outer parts of the oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.
22