Table of Contents
Advertisement
o During pyrolytic cleaning, the oven light will not switch on.
o At the end of the pyrolytic cycle the LED display w
and the automatic cooking symbol (8) will continue to flash until
the selector knob is turned to the "0" (off) position.
o The oven door will remain locke
fallen below the safety threshold. When the oven has cooled
sufficiently the door will unlock.
The door lock symbol (6) w
u
nlocking, will be on statically when it is locked, and will be off
when the door is unlocked.
o When the oven has reached a warm temperature, you should use a
soft damp cloth to wipe out the resultant
cleaning results, you should not allow the oven to get completely
cold before wiping away the ash deposits.
I
MPORTANT: Remember to turn the oven function selector knob to
the off position ("0") after each use.
I
mportant: Please note that you should not attempt to open the door
u
ntil the cleaning cycle has fully completed as outlined above.
General cleaning information
o Never clean any of the oven surfaces by steam cleaning.
o Outer parts of th
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o We would
recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
o If you use any form of ove
must check with the manufacturer of the cleaner that it is suitable
for use on your appliance.
Any damage that is caused to the app
p
roduct will not be fixed by Baumatic free of charge, even if the
a
ppliance is within the guarantee period.
d until the oven temperature has
ill flash when the door is locking or
e oven should only be cleaned with warm soapy
n cleaner on your appliance, then you
ill show "P---"
ash deposits. For best
liance by a cleaning
26
Advertisement
Table of Contents
