Table 11 - Input/Output Menu Settings - HP OMNIBOOK 5500 Service Manual

Table 11 - Input/Output Menu Settings

Setting
COM Ports...
Serial Port:
IR Port
LPT Port
Printer Port
LPT Type
Port Definition
Keyboard Setup...
Key Delay
Key Repeat Rate
Keyboard
Numlock
External Devices...
VGA Display
device
Television Type
Force recognition
of external VGA
Enable External
FN Key
Ignore External
Parameters
None
COM1, Addr 3F8, IRQ 4
COM2, Addr 2F8, IRQ 3
COM3, Addr 3E8, IRQ 4
COM4, Addr 2E8, IRQ 3
None
COM1, Addr 3F8, IRQ 4
COM2, Addr 2F8, IRQ 3
COM3, Addr 3E8, IRQ 4
COM4, Addr 2E8, IRQ 3
None
LPT1, Addr 378
LPT2, Addr 278
LPT3, Addr 3BC
Standard AT (Centronics)
Bidirectional (PS-2)
¼ sec; ½ sec; ¾ sec; 1
sec
2 cps; 6 cps; 10 cps; 15
cps; 20 cps; 30 cps
Selected, Not selected
External VGA if attached,
LCD off;
Both external VGA and
LCD
NTSC; PAL
Selected; Not selected
Selected; Not selected
Selected; Not selected
Default
COM1, Addr 3F8, IRQ 4
COM2, Addr 2F8, IRQ 3
LPT1, Addr 378
Bidirectional (PS-2)
½ sec
10 cps
Not selected
External VGA if
attached, LCD off;
NTSC
Not selected
Selected
Not selected
Comment
Select the delay period to
wait (after a key is
pressed) before it will
begin to repeat.
Select the rate at which
keys will be repeated when
they are held down longer
than the Key Delay period.
Start computer with NUM
LOCK enabled.
When 'External VGA...' is
selected, if an external
VGA monitor is detected, it
will be enabled and the
LCD will be turned off.
When 'Both external VGA
and LCD' is selected, both
are ALWAYS on.
Select the television type.
This setting is available
only on the OmniBook
5500.
Available only when Both
external VGA and LCD is
selected. This setting
not available on the
OmniBook 5500.
When enabled, CTRL +
ALT on external keyboard
acts as FN key.
53