Top Cover - HP ProBook 4710s Maintenance And Service Manual

Top cover

Description
Top cover
Power button board (includes cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Switch cover and keyboard (see
b. Memory module (see
c. Optical drive (see
d. Speakers (see
e. Palm rest (see
f. WLAN module (see
g. Hard drive (see
h. Display assembly (see
Remove the top cover:
1. Turn the computer right-side up, with the front toward you.
Battery on page 41).
Switch cover and keyboard on page
Memory module on page
Optical drive on page
Speakers on page 49)
Palm rest on page 50)
WLAN module on page
Hard drive on page 52)
Display assembly on page
45)
47)
55)
59)
Component replacement procedures
Spare part number
535796-001
574493-001
42)
65