DriveLock Passwords
System IDs
Disk Sanitizer
Diagnostics menu
Select
HDD Self-Test Option
Memory Check
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
Language
●
Enable/disable DriveLock on any computer hard drive.
●
Enter, change, or disable DriveLock on an optional
MultiBay hard drive.
NOTE:
DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
Enter a user-defined computer asset tracking number and
ownership tag.
Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Fast: Runs the Disk Sanitizer erase cycle once.
●
Custom: Allows you to select the desired number of Disk
Sanitizer erase cycles from a list.
CAUTION:
If you run Disk Sanitizer, the data on the primary
hard drive is destroyed permanently.
To do this
Memory Check
Run a comprehensive check on system memory.
To do this
Change the Computer Setup language.
Computer Setup in Linux
91