1. Manuals
  2. Brands
  3. Barco Manuals
  4. Monitor
  5. E-2320 C
  6. Installation & user manual

Barco E-2320 C Installation & User Manual

Hide thumbs Also See for E-2320 C:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, System Manual
E-2320 C
Installation & User Manual

Advertisement

Table of Contents
loading

Related Manuals for Barco E-2320 C

Summary of Contents for Barco E-2320 C

  • Page 1 E-2320 C Installation & User Manual...
  • Page 2 (This page intentionally left blank.) (This page intentionally left blank.) E-2320 C...
  • Page 3 - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without written permission of Barco © 2007 Barco N.V. All rights reserved. E-2320 C...
  • Page 4 (This page intentionally left blank.) E-2320 C...

  • Page 5: Table Of Contents

    Using the Autoset function..........31 Adjusting Geometry............32 Contrast adjustment ............33 Brightness adjustment............34 Color temperature selection..........35 Locking and unlocking user controls........36 Complete OSD overview............. 38 NioWatch software..............44 Introduction ................. 44 Display settings..............45 E-2320 C...
  • Page 6 Table of Contents Test patterns ............... 55 Application settings ............56 Update NioWatch ..............59 Cleaning ..................... 61 Troubleshooting ................. 63 Technical Information................ 68 Technical specifications.............. 68 Connector pin assignments ............70 Glossary ..................71 Warranty Statement ................74 E-2320 C...

  • Page 7: Preface

    BarcoView software products are the property of BarcoView. They are distributed under copyright by Barco N.V. or BarcoView, LLC., for use only under the specific terms of a software license agreement between Barco N.V. or BarcoView LLC. and the licensee.

  • Page 8: Safety Instructions

    Retain safety and operating instructions for future reference. Adhere to all warnings on the display and in the operating instructions manual. Follow all instructions for operation and use. Electrical shock Type of protection (electrical): Class I equipment E-2320 C...
  • Page 9 Water and moisture Never expose the display to rain or moisture. Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement. E-2320 C...
  • Page 10 CE (LVD 73/23/EEC), IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1 (c-UL), EN 60950-1 DEMKO, CCC GB4943-1995 National Scandinavian Deviations for Cl. 1.7.2 : Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan" Norway: "Apparatet må tilkoples jordet stikkontakt" Sweden: "Apparaten skall anslutas till jordat uttag" E-2320 C...

  • Page 11: Explanation Of Symbols

    Indicates the display is approved according to the CCC regulations Indicates the USB connectors on the display Indicates this apparatus must not be thrown in the trash but must be recycled, according to the European WEEE (Waste Electrical and Electronic Equipment) directive E-2320 C...
  • Page 12 Preface Symbols used throughout the manual: Warning Caution Important notice or Note remark Hint, tip Additional information E-2320 C...

  • Page 13: Introduction

    • display controller manual on the driver CD-ROM E-2320 C display The E-2320 C is a 20.1-inch color LCD display with a native resolution of 1600 x 1200. Its high-brightness, combined with image crispness and excellent viewing angle, makes it an ideal solution for a multitude of medical applications and environments.

  • Page 14: Package Contents

    The power saving system can be switched on or off using the on- screen menus. Barco recommends to let the power saving system switched on to prevent image sticking. Tilt & swivel base The versatile tilt &...

  • Page 15: Parts, Controls And Connectors

    • Chinese power cord • This manual • Quick install card If some of the items are missing, please contact the reseller from whom you have purchased the unit. Parts, controls and connectors Front BAR CO Figure 1 E-2320 C...
  • Page 16 The LED is orange when the display is in Stand-by power- saving mode. Rear Figure 2 1. Connector compartment cover To get access to the connectors, remove the cover by pulling down the 2 clips at the top of the cover. E-2320 C...
  • Page 17 Do not throw the clip away! Should the display have to be packed and shipped later, the clip must be applied to the foot again. 10. Slot for security cable (e.g., Kensington lock) E-2320 C...

  • Page 18: Installation

    Display installation After unpacking the display Important: In the factory, the height-positioning system in the display foot is blocked with a red clip to prevent damage during transportation. Before installing the display, you must remove this clip. E-2320 C...
  • Page 19 1. Stand at the front side of the panel and take the panel at both sides. 2. Very important: Tilt the panel before changing the orientation. Should you change the panel orientation without tilting it first, you might irreversibly damage the tilt & swivel mechanism. E-2320 C...
  • Page 20 Installation Figure 4 3. To change from landscape to portrait, turn the panel clockwise. BAR CO Figure 5 4. To change from portrait to landscape, turn the panel counterclockwise. E-2320 C...

  • Page 21: Power Connection

    2. Connect the output of the supplied 12V DC power supply to the DC input of the display. Figure 6 3. Connect one end of the proper power cable to the AC input of the 12V DC power supply. Figure 7 E-2320 C...

  • Page 22: Video Connection

    1. Connect one end of the DVI cable to the DVI input of the display. 2. Connect the other end of the DVI cable to the DVI connector of the display controller. If this board has 2 video heads (2 video outputs), connect to Vid 1 (Head A). Figure 8 E-2320 C...
  • Page 23 Connecting analog video Proceed as follows: 1. Connect one end of the VGA cable to the D15 input of the display. 2. Connect the other end of the VGA cable to the analog video output of your computer. Figure 9 E-2320 C...

  • Page 24: Usb Connection

    Installation USB connection If the display receives video from a Barco-supported display controller, it is not necessary to establish a USB connection to use the nioWatch software. If this is not the case, you must connect the USB cables if you wish to use the nioWatch software.
  • Page 25 2. Slide the cover upward while moving the lower side of the cover towards the foot. 3. Press the cover to the foot so that it makes a clicking sound. E-2320 C...

  • Page 26: Attaching The Display To An Arm

    Next, remove the small cover itself. Figure 12: Display with tilt & swivel foot cover removed 4. Unscrew the 2 screws fixing the round plastic cover (B). 5. Lift up the round plastic cover. E-2320 C...

  • Page 27: Niowatch Installation

    NioWatch CD and double click on the file: “Setup.exe”. 2. Click “Install Now” on the start screen to begin the installation. Figure 14: NioWatch installation start screen 3. Click “Next” on the Installshield Wizard welcome screen. E-2320 C...
  • Page 28 8. On the Ready to Install the Program screen, click “Install” to start the installation. While the wizard is installing NioWatch, it will display a Setup Status screen. 9. On the Installation Finished screen, check the appropriate selections and click “Finish” to complete the installation. E-2320 C...

  • Page 29: Operation

    The LED turns orange. When the display is in stand-by, push and hold the control wheel to switch it back on. The LED turns green. Push and hold BAR CO Figure 15 E-2320 C...

  • Page 30: On-Screen Display

    Operation On-screen display About the on-screen display The on-screen display (OSD) has a hierarchical structure, with several levels. The top level is the “Main Menu”. E-2320 C MAIN MENU Autoset Video Contrast Video Brightness Luminance Adjustments Input Selection Auto Settings...

  • Page 31: Using The Autoset Function

    * Not available in DVI mode When do you need to use the Autoset function? • The first time you use the display with analog video connected. • After connecting or selecting another analog video source (e.g., changing the PC resolution). E-2320 C...

  • Page 32: Adjusting Geometry

    3. Rotate the control wheel to select Full Autoset. 4. Press the control wheel to execute the function. Adjusting Geometry To perform geometry adjustments: 1. Rotate the control wheel to display the on-screen display. The Main Menu appears. E-2320 C...

  • Page 33: Contrast Adjustment

    * Not available in DVI mode Contrast adjustment This adjustment is not necessary (and not available) when digital video (DVI) is connected and selected. By default, the contrast is set in calibrated (CAL) position. E-2320 C...

  • Page 34: Brightness Adjustment

    If you change Contrast manually, the changed value is saved in the memory. Brightness adjustment This adjustment is not necessary (and not available) when digital video (DVI) is connected and selected. By default, the brightness is set in calibrated (CAL) position. E-2320 C...

  • Page 35: Color Temperature Selection

    If you change brightness manually, the changed value is saved in the memory. Color temperature selection To modify a color temperature definition: 1. Rotate the control wheel to display the on-screen display. The Main Menu appears. 2. Rotate the control wheel to select Settings. E-2320 C...

  • Page 36: Locking And Unlocking User Controls

    3. Press the control wheel to enter the Settings menu. SETTINGS DPMS Power LED User Controls Automatic Menu Exit EXIT 4. Rotate the control wheel to select User Controls. 5. Press the control wheel to switch from “On” to “Off”. E-2320 C...
  • Page 37 SETTINGS DPMS Power LED User Controls Automatic Menu Exit EXIT 7. Rotate the control wheel to select User Controls. 8. Press the control wheel to switch from “Off” to “On”. 9. Exit the menus and save the changes. E-2320 C...

  • Page 38: Complete Osd Overview

    Rename the current Preset or select another Preset that matches the char- acteristics of the selected video signal Information Read information about the display and the selected video signal Autoset The Autoset menu is not available in DVI mode. E-2320 C...
  • Page 39 Required test pattern To obtain good results with the autoset functions, it is necessary to have a good image on which to perform the functions. E.g., a maximized Windows Explorer window would be a good image. E-2320 C...
  • Page 40 Manually adjust brightness Luminance Name Description Luminance Target Manually adjust the luminance The calibrated luminance is indicated as 100% Caution: Increasing the luminance setting to a value higher than 100% may significantly decrease the lifetime of the display backlight. E-2320 C...
  • Page 41 Adjust the video sampling frequency manu- ally. However, we recommend you use the Automatic Phase function (Autoset menu). Man Phase adj Adjust the video sampling phase manually. However, we recommend you use the Auto- matic Phase function (Autoset menu). E-2320 C...

  • Page 42: Input Selection

    Select the best frequency corresonding to your graphic board (see the documentation of your graphic board). After changing this setting you must reboot the PC so that the graphic board changes the vertical frequency of the video signal. E-2320 C...
  • Page 43 Displays the currently selected memory Preset Preset Name The name of the current memory Preset Hor Frequency The currently measured horizontal sync fre- quency Vert Frequency The currently measured vertical sync frequency Resolution Displays the actual video signal resolution E-2320 C...

  • Page 44: Niowatch Software

    Note: After installation, a shortcut “NioWatch Client” is installed in the Nio- Watch installation directory. You can copy this shortcut to another location (e.g., desktop) if desired. After double-clicking this shortcut, the NioWatch console appears, allowing you to execute the NioWatch functions. Figure 17: NioWatch console E-2320 C...

  • Page 45: Display Settings

    You can do this by clicking on the corresponding numbered icon or by selecting the corresponding display controller head from the Display drop-down box. Tip: If you click on a numbered icon, the corresponding number appears for a few seconds on the display connected to that E-2320 C...
  • Page 46 Display Settings • To select another display function, select an item from the Display Function drop-down box. If the selected display has been calibrated to the selected display function in the past, the display will be set according E-2320 C...
  • Page 47 2.2 Gamma 1.8 Select this display function in case the dis- play is to replace a CRT display with a gamma of 1.8 Linear If you select Linear, the native panel behavior will not be corrected. E-2320 C...
  • Page 48 DICOM display function, it is the NioWatch application that ensures DICOM compliance. Be aware that if you use the display without NioWatch afterwards, the display is no longer DICOM compliant. In that case, please consult Barco MIS service to reset the display function to DICOM. E-2320 C...
  • Page 49 Operation Graphic Board tab Figure 19: Graphic Board tab Here you can see information about the installed display controller: Name, serial number, driver version and firmware version. E-2320 C...
  • Page 50 “Use Constant Chroma Calibration for color displays” in the Application Settings dialog is set. See “Calibration tab” in the description of the Application Settings dialog. E-2320 C...
  • Page 51 3. A message appears, showing the different calibration options. Figure 21: Calibration choices 4. Select “Using the BARCO LCD sensor” and click OK. This option is grayed in case NioWatch does not find a connected Barco LCD sensor. E-2320 C...
  • Page 52 Next. The display number that appears in this option, refers to the reference display, which is the first calibrated display in the system. Manual calibration 1. Follow step 2 and 3 of the calibration with Barco LCD sensor (see page 51). E-2320 C...
  • Page 53 6. Click OK to finish. To reset to the latest calibration: 1. If you have multiple displays connected (multi-head system), select the display you wish to reset to the latest calibration. 2. Click the Reset button. E-2320 C...
  • Page 54 2. Click the Reset button. 3. In the next dialog box, select option Reset to the factory default calibration and click OK. 4. As a result, the settings are restored to the default factory values. E-2320 C...

  • Page 55: Test Patterns

    (e.g., saved on the hard disk) as test pattern. 3. To hide the test pattern again, click inside the pattern. Note: The test pattern Auto Adjust can be used as test pattern for the Auto Adjust functions in the display OSD. E-2320 C...

  • Page 56: Application Settings

    When this option is checked, calibrating, resetting calibration and selecting another display function can be performed only by users with administrator rights on this workstation. This option can be checked and deselected only by users with administrator rights on this workstation. E-2320 C...
  • Page 57 (2) to have the same output luminance as display (1). Therefore first calibrate display (1). Next, calibrate display (2) while the Equalization option is checked. The first calibrated display in the system is the reference display. E-2320 C...
  • Page 58 When this option is checked, the next calibration with sensor will give all grayscale levels on the display the same chroma or color temperature, which is the panel native white chroma. This option has effect only when calibrating color displays with the Barco LCD sensor. E-2320 C...

  • Page 59: Update Niowatch

    For more information about MediCal Administrator, please contact Barco Medical Imaging Systems or consult our web site. Update NioWatch In the Windows Start menu, the Update NioWatch application is installed during installation of NioWatch.
  • Page 60 Operation To update NioWatch: Select Update NioWatch from the Start > Programs > Barco NioWatch menu. The application will search via the Internet if NioWatch updates are available. If so, you will get the option to install them. E-2320 C...

  • Page 61: Cleaning

    • Repeat with water only. • Wipe dry with a dry cloth. • The cabinet has been tested for resistance to the following products: Cidex, Betadine, Alcohol (Isopropyl and Ethyl), Ammonia- based cleaners (Windex) and Aquasonic Gel. E-2320 C...
  • Page 62 25% Isopropyl Alcohol (IPA) and 75% de-ionized or distilled water. E.g.: Cleareen, a product of Certified Laboratories. • Take another clean, dry, soft, lint-free cloth and gently wipe the glass dry. E-2320 C...

  • Page 63: Troubleshooting

    • If one display from a multi-head system exhibits problems, try to eliminate the problem by switching video cables or power supplies. In that way you can find out if the problem resides in the display or not. E-2320 C...

  • Page 64: Problems And Solutions

    PC or to the display • Display may need Phase and Frequency adjustments (if analog video is selected) Image contains missing pixels • A number of missing pixels is normal (inherent in LCD technology) E-2320 C...
  • Page 65 Switch the “Scaling” function (Geometry menu) in the display OSD to “None” or “Best Fit” The image on the screen is • Rotate the image using the rotated 90° display controller control panel. See the display controller manual E-2320 C...
  • Page 66 Note: What if the graphic board resolution is too low Some non-Barco graphic boards (e.g., single-link boards) may have an insufficiant resolution to drive the display. You can solve this problem by forcing the graphic board to operate on a lower vertical frequency.
  • Page 67 Troubleshooting 6. Reboot the computer. After reboot, the signal from the graphic board should now be visible on the display. E-2320 C...

  • Page 68: Technical Information

    Push / turn control wheel for stand- by switching and OSD controls Input connectors DVI single link, D-Sub15 pin Signal systems DVI Digital, RGB Analog Video on DVI: Complying to DVI Rev 1.0 specifications Sync on DVI: Complying to DVI Rev 1.0 specifications E-2320 C...
  • Page 69 Net weight 12 kg Operating Temperature 0°C to 40°C, 15°C to 35°C within specs Storage Temperature -20°C to 60°C Humidity 8% - 80% (non-condensing) for operation 5% - 95% (non-condensing) for storage Altitude 7500 m storage 3000 m operation E-2320 C...

  • Page 70: Connector Pin Assignments

    Figure 29: DVI connector pin layout Pin no. Signal Pin no. Signal TMDS DATA 2- +5V POWER TMDS DATA 2+ HOT PLUG DETECT TMDS DATA 0- TMDS DATA 0+ DDC CLOCK DDC DATA TMDS DATA 1- TMDS DATA 1+ TMDS CLOCK- TMDS CLOCK+ E-2320 C...

  • Page 71: Glossary

    Each display is calibrated in the factory before it is sent to the customer. After this calibration, black and white luminance are set to the ideal level. A stabilization routine, constantly active when the display is on, keeps these levels constant using the built-in sensor. E-2320 C...
  • Page 72 The standard specifies how digital image data can be moved from system to system. In addition, Supplement 28 Part 14 specifies a function that relates pixel values to displayed Luminance levels and is called Grayscale Standard Display Function. E-2320 C...
  • Page 73 Preset, the display uses default settings to display the image. When you make adjustments and save the changes, the current Preset is saved as programmable Preset. If this happens while all programmable Presets are occupied, the oldest programmable Preset is overwritten automatically. E-2320 C...

  • Page 74: Warranty Statement

    The warranty period for the replacement parts will expire at the same moment as the original warranty period of the equipment. All parts replaced hereunder and returned to BarcoView (or an authorized service E-2320 C...
  • Page 75 2.6 Any specific services or procedures, asked for by Customer, related to verification of repaired equipment. ARTICLE 3: OBLIGATIONS OF THE CUSTOMER Customer hereby assumes the following obligations as partial consideration for BarcoView performance of its requirements under the warranty condition; failure by Customer to meet its E-2320 C...
  • Page 76 The liability of BarcoView for manufacturing, sale, delivery, resale, installation, operation or suitability for use of any E-2320 C...
  • Page 77 8.2 BarcoView shall not be responsible for machine failure and/ or its failure to render service or maintenance due to causes beyond its reasonable control. E-2320 C...
  • Page 78 B4100529 - 02 July 2007 www.barco.com...

Table of Contents