Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Barco Eonis MDRC-2224
Summary of Contents for Barco Eonis MDRC-2224
- Page 1 Eonis User Guide 24-inch clinical display MDRC-2224 K5903081/05 08/03/2016...
- Page 2 Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/en/support Visit us at the web: www.barco.com Printed in Belgium...
-
Page 3: Table Of Contents
Table of contents TABLE OF CONTENTS 1. Welcome! ..................3 About the product .................... . 3 What’s in the box. - Page 4 Table of contents K5903081 EONIS 08/03/2016...
-
Page 5: Welcome
The multi- ple mounting options and connections further add to the smart design typical of Barco’s Eonis display. Most unique, however, is the excellent cleanability of the white Eonis display thanks to the toughened and scratch-proof glass. -
Page 6: What's In The Box
1. Welcome! What’s in the box Overview Your Eonis comes with: • this Eonis user guide • a documentation CD containing multilingual user documentation • a system CD containing MediCal QAWeb Agent • a (set of) AC power cord(s) (depending on the region of operation) •... -
Page 7: Parts, Controls And Connectors
2. Parts, controls and connectors 2. PARTS, CONTROLS AND CONNECTORS Front view Overview Image 2-1 1. Front sensor 2. USB downstream connector 3. Left / Decrease key 4. Right / Increase key 5. Menu / Enter key 6. Standby key 7. -
Page 8: Rear View
2. Parts, controls and connectors Rear view Overview Image 2-2 1. Connector compartment cover 2. Kensington security slots 3. Opening for cable routing strap 4. +12 VDC ( ) power input 5. USB downstream connector 6. USB upstream connector 7. VGA input 8. -
Page 9: Display Installation
3. Display installation 3. DISPLAY INSTALLATION Adjusting the display position To adjust the display position You can now safely pivot, tilt, swivel, raise and lower your display as desired. Image 3-1 The standard orientation of the video input is landscape. If you use the display in portrait mode, make sure you change the orientation of the video input via the screen settings of the computer. -
Page 10: Connecting The Cables
3. Display installation Image 3-2 Connecting the cables To connect the cables 1. Connect one or more of the video input connections of your display (VGA, HDMI or DisplayPort) to the corresponding video outputs on your computer or any other video device. 2. -
Page 11: Re-Attaching The Cover
3. Display installation Re-attaching the cover To re-attach the connector compartment cover Put the cover back in position by sliding it downwards so that it is fixed to the display again. Pay attention that all cables stay in the cable channel while re-attaching the cover. Image 3-4 Routing the cables To route the cables... -
Page 12: Vesa-Mount Installation
3. Display installation Image 3-6 VESA-mount installation To mount the display on a VESA arm The display panel, standard attached to a stand, is compatible with the VESA 100 mm standard. 1. Put the display face down on a clean and soft surface. Be careful not to damage the panel screen. 2. - Page 13 3. Display installation AUTION Use suitable mounting apparatus to avoid risk of injury. K5903081 EONIS 08/03/2016...
- Page 14 3. Display installation K5903081 EONIS 08/03/2016...
-
Page 15: Daily Operation
To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels. To learn more about LCD technology and missing pixels, consult the dedicated white papers available at www.barco.com/healthcare. -
Page 16: On/Off Switching
4. Daily operation On/Off switching To switch your display on or off 1. Shortly press the Standby ( ) key. Bringing up the OSD menus About the OSD menu The OSD menu allows you to configure different settings to make your Eonis display fit your needs within your working environment. -
Page 17: Advanced Operation
5. Advanced operation 5. ADVANCED OPERATION Video input source selection About video input source selection By default, your Eonis display automatically detects and shows the connected video input source. How- ever, when for instance more then one video input source is connected, it may be needed to manually select the input source to be displayed. -
Page 18: Ambient Light Reading Room Selection
DICOM: DICOM (Digital Imaging and Communications in Medicine) is an international standard that was developed to improve the quality and communication of digital images in radiology. In short, the DICOM gamma function results in more visible grayscales in the images. Barco recommends selecting the DICOM gamma function for most medical viewing applications. -
Page 19: Analog Video Settings
5. Advanced operation To select the white point 1. Bring up the OSD main menu. 2. Navigate to the Adjustments menu. 3. Enter the White Point submenu. 4. Select one of the available white point presets. Analog video settings The following settings are only available when VGA video input source is selected. About analog video settings When the VGA video input source is active, a number of analog video settings will become available: •... -
Page 20: Power Status Led
5. Advanced operation 2. Navigate to the Adjustments > Settings menu. 3. Enter the Language submenu. 4. Select one of the available languages. Power status LED About the power status LED By default, the power status LED has the following behavior: •... -
Page 21: Self Calibration Frequency
5. Advanced operation 5.10 Self calibration frequency About self calibration The front sensor of your Eonis display measures the output luminance of your screen and allows the display to automatically stabilize its luminance for maximum image quality over the displays’ lifetime. This self calibration is done at an adjustable, predefined frequency: •... - Page 22 5. Advanced operation K5903081 EONIS 08/03/2016...
-
Page 23: Maintenance
The Eonis does not require any scheduled maintenance or calibration activities. We recommend to use QAWeb with the Barco default tests and frequencies to calibrate and maintain the display or return the display to a Barco approved maintenance organization. In any case of doubts, contact the Barco Health- care Division. - Page 24 6. Maintenance K5903081 EONIS 08/03/2016...
-
Page 25: Important Information
7. Important information 7. IMPORTANT INFORMATION Safety information General recommendations Read the safety and operating instructions before operating the device. Retain safety and operating instructions for future reference. Adhere to all warnings on the device and in the operating instructions manual. Follow all instructions for operation and use. - Page 26 7. Important information To fully disengage the power to the device, please disconnect the power cord from the AC inlet. Power cords: • Do not overload wall outlets and extension cords as this may result in fire or electric shock. •...
-
Page 27: Environmental Information
(Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”. - Page 28 “Electronic Information Products Pollution Control Labeling Standard” of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “Standard of Electronic Information Products Environmental Friendly Use Period”...
-
Page 29: Regulatory Compliance Information
7. Important information China Energy Label If there is a China Energy Label on your packaging or product, the product meets the following energy requirements corresponding with the energy efficiency level on the label. 按照中国 <<能源效率标识管理办 本显示器符合以下要求 本显示器符合以下要求 法>> This monitor is compliant with the This monitor is compliant with the following requirements following requirements... -
Page 30: Emc Notice
7. Important information EMC notice General information No specific requirement on the use of external cables or other accessories except power supply. With the installation of the device, use only the delivered power supply or a spare part provided by the legal manufacturer. - Page 31 7. Important information Immunity test IEC 60601 Compliance level Electromagnetic environment – Test levels guidance Electrical fast ± 2kV for power supply ± 2kV for power supply Mains power quality transient/burst lines lines should be that of a typical commercial or hospital IEC 61000-4-4 ±...
- Page 32 7. Important information Immunity test IEC 60601 Compliance level Electromagnetic environment – Test levels guidance separation distance in meters (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, should be less than the compliance level in each frequency range.
-
Page 33: Explanation Of Symbols
7. Important information At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. These guidelines may not apply in all situations. Electromagnetic propagation is af- fected by absorption and reflection form structures, object and people. Explanation of symbols Symbols on the device On the device or power supply, you may find the following symbols (nonrestrictive list):... - Page 34 7. Important information Indicates the device is approved according to the BSMI regulations Indicates the device is approved according to the PSE regulations Indicates the USB connectors on the device Indicates the DisplayPort connectors on the device Indicates the legal manufacturer Indicates the manufacturing date Indicates the temperature limitations for the device to safely operate within specs...
-
Page 35: Legal Disclaimer
Barco software products are the property of Barco. They are distributed under copyright by Barco NV or Barco Inc., for use only under the specific terms of a software license agreement between Barco NV or 7. Values for xx and yy can be found in the technical specifications paragraph. -
Page 36: Technical Specifications
7. Important information Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized. The specifications of Barco products are subject to change without notice. Trademarks All trademarks and registered trademarks are property of their respective owners. - Page 37 7. Important information Product acronym MDRC-2224 BL MDRC-2224 WH MDRC-2224 WP 560.4 x 533 x 164.45 mm 560.4 x 533 x 166.35 Dimensions with stand (W x H x Dimensions w/o stand (W x H x 560.4 x 366 x 59.82 mm 560.4 x 366 x 61.72 Dimensions packaged (W x H x 481 x 273 x 761 mm...
- Page 38 7. Important information K5903081 EONIS 08/03/2016...
-
Page 39: Troubleshooting
A. Troubleshooting A. TROUBLESHOOTING Troubleshooting General If you experience trouble with the LCD display, refer to the following troubleshooting. If the problem per- sists, please contact your local dealer or our service center. Problem: No image appears on the screen •... - Page 40 A. Troubleshooting Problem: Out of range This message means that the signal of the computer graphics card is not compatible with the display. When the signal is not included in the compatibility mode we have listed in the appendices of this manual, the display will show this message.