Using The Dual Feed Position Lever; Adjusting The Amount Of Fabric Feeding Of The Dual Feed Foot - Baby Lock Crescendo BLCR Instruction And Reference Manual

■ Replacing the Sole Part of the Dual
Feed Foot
If you push down on the front part of the dual feed
foot, the sole part of the dual feed foot will snap off.
Attach the sole by aligning the pins with the notches
and snap it into place.
a Pins
b Notches
USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE

■ Using the Dual Feed Position Lever

■ Adjusting the Amount of Fabric
a
b
When the feed position lever is up, the black roller
belt on the dual feed is not engaged.
When the feed position lever is down, the black
roller belt on the dual feed is engaged.
Note
• Do not operate the lever while sewing.
Feeding of the Dual Feed Foot
The dual feed mechanism pulls the top fabric
according to the set stitch length. With troublesome
fabrics, fine tune the set length, by changing the
dual feed feed adjustment in the settings screen.
Note
• As a default, some keys mentioned in the
following procedures appear in light gray
and are not available. To enable the keys for
specifying the settings, attach the dual feed
foot and connector to the machine. The
keys are enabled after the dual feed foot is
detected.
Press .
→ The settings screen appears.
Display page 1 of the settings screen.
Basic operations B-57
B
1