Baby Lock Tiara BLTR16 Instruction And Reference Manual page 25

Options
Volume
Brightness
Back
Diagnostics
Motor
Needle
Back
Diagnostics
Motor Sensor Test
Rotate the handwheel slowly.
Passing Test:
Regular pulsing beeps as you
rotate the handwheel.
Failing Test:
A solid tone or no beeping at all
as you rotate the handwheel.
Back
Page 24
100%
100%
Main
Figure 26
Speed
Foot Pedal
Main
Figure 27
Main
Figure 28
Options Screen (Figure 26)
Volume
The "Volume" portion of this screen has two buttons and
a sliding control. Pressing on the "Mute" button turns off
the sound of the buttons when they are pressed. Press-
ing the "Max" but ton turns the volume to its loudest
level. Pressing the sliding control in any position sets
the volume to the level indicated in that control. Press-
ing and moving back and forth across the sliding control
will change the volume up as it is moved left to right and
down as it is moved from right to left .
Brightness
The "Brightness" portion of this screen has two buttons
and a sliding control as well. The LED Light Ring can
be turned on completely with the illuminated light bulb
button or off completely with the darkened light bulb but-
ton. Pressing the sliding control in any position will set
the brightness to the value indicated in the slider control.
Pressing and moving back and forth across the sliding
control will change the brightness up as it is moved left to
right and down as it is moved right to left.
Press the "Main" button to return to Main menu screen or
the "Back" button to return to the "More" menu screen.
Diagnostics Screen (Figure 27)
Four different diagnostics tests can be performed on the
machine. These functions test the motor control opera-
tion, the foot pedal and the internal position sensors.
Press the "Main" button to return to the "Main" menu
screen or the "Back" button to return to the "More" menu
screen.
Diagnostics Tests (Figure 28)
Motor Sensor Test
The "Motor" Sensor test can help you determine whether
they may be a problem with the Baby Lock Tiara motor.
Slowly rotating the handwheel should result in an audible
"beep." If you get a constant solid "beep" or no "beep" at
all, this indicates a failed test and the machine should be
inspected by your authorized Baby Lock retailer.
Press the "Main" button to return to the "Main" menu
screen or the "Back" button to return to the "More" menu
screen.
Baby Lock Tiara Instruction Manual