Table of Contents
Advertisement
User Manual
Disable NAT: Enable or disable the NAT function.
Internet Connection: Select the Static IP.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
ISP Gateway IP Address: Enter the gateway IP address provided by your ISP.
MAC Address: Enter the MAC address of the host that accesses the Internet via the
wireless router. Some ISPs requires you to enter the MAC address. After entering
the MAC address, only the host with the corresponding MAC is allowed to access
the Internet via the wireless router.
MAC Clone: After clicking this button, the MAC address of the host that is managing
the Web page will be copied to the MAC Address field.
Primary DNS: Enter the primary DNS address provided by your ISP.
Secondary DNS: Enter the secondary DNS address provided by your ISP.
MTU: Set the MTU value. You may consult your ISP whether this value needs to be
Page 37 of 68
Advertisement
Table of Contents
