Table of Contents
Advertisement
User Manual
Settings
Router IP Address: The IP address of the LAN interface. The default IP address is
192.168.2.1. You can change it according to the actual situation.
Router Subnet Mask: The subnet mask of the LAN interface. You can enter
different subnet masks according to the actual network configuration.
Domain Name: Set the domain name of the wireless router.
Enable DNS Relay: Enable or disable the DNS relay.
Enable DHCP Server: Enable or disable the DHCP server. After enabling the DHCP
server, the DHCP sever of the wireless router will automatically set the network
parameters such as IP address, subnet mask, and gateway to host devices on the
LAN.
DHCP Lease Time: Set the active time of the dynamic IP address the DHCP server
assigns to host devices on the LAN. During the lease time, the DHCP server will not
assign this IP address to other hosts.
DHCP Client List
DHCP client list displays the information about all the hosts connected to the DHCP
server.
DHCP Client MAC Binding
The static address allocation function of the wireless router can reserve the static IP
address for a PC with a specific MAC address. When a PC requests for an IP
address from the DHCP server, the DHCP server assigns the reserved IP address
in the allocation table to the PC.
IP Address: The IP address that is reserved for a specific device.
MAC Address: The MAC address of the host device.
After completing the setup, click the Add Rule button to add the new binding rule.
Page 35 of 68
Advertisement
Table of Contents
