Axis 210A User Manual page 58

Hide thumbs Also See for 210A:
Table of Contents

Advertisement

AXIS 210A/211A - Technical Specifications
58
Item
Audio
Security
Users
Language support
(Web interface)
Alarm and event management • Events triggered by built-in motion detection, audio detection, active tampering
Connectors
Casing
Specification
• Two-way (full or half duplex), one-way or audio off.
• Encoding formats (selected under System Options):
ADPCM format at 24kbps, 8 kHz sampling (G.726 - select G723 from
drop-down list)
ADPCM format at 32kbps, 8 kHz sampling (G.726 - select G721 from
drop-down list)
PCM μ−law format at 64kbps, 8 kHz sampling (G.711 default)
• Built-in microphone, external microphone input or line input. Mono audio
output (line level) connects to PA system or active speaker with built-in
amplifier.
• External audio input: Single 3.5mm input for a mono microphone, or line-in
mono signal (left channel is used from a stereo signal).
• Microphone input sensitivity: High = max -38 dBu (27 mVpp), Low = max -18
dBu (275 mVpp)
• Line input - max: 11.2 dBu (8.0 Vpp); Line output - max: 3Vpp
• DC power through input connector for external microphones supported.
• Audio output (line level) connects to PA system or active speaker with built-in
amplifier. Headphones can also be connected. A stereo connector must be used
for the audio out.
• Audio output: max 3.0 Vpp (+2.7dBu)
• Audio output impedance: min 38 ohm; max 10 ohm
• Audio input impedance: 7kohm
• Audio compression: G.711 PCM 64kbit/s, G.726 ADPCM 32 or 24 kbit/s
• Multiple user access levels with password protection
• IP address filtering
• HTTPS encryption
• Network access control IEEE801.1X
• User access log
• 20 simultaneous users
• Unlimited users using multicast (MPEG-4)
• English. Downloadable language files for French, German, Italian, Japanese and
Spanish are available at www.axis.com/techsup.
• Other language files may also be available
alarm, external inputs or according to a schedule.
• Image upload over FTP, email and HTTP Notification over TCP, email, HTTP and
external outputs.
• Pre- and post alarm buffer: up to 9 MB (up to 5 min of 320x240 video at 4
frames per sec).
• RJ-45 for Ethernet 10BaseT/100BaseTX
• Terminal block for 1 alarm input, 1 output and alternative power connection
• 3.5 mm jack for Mic in (max 270mVpp) or Line mono input (3.2Vpp)
• 3.5 mm jack for Line mono output (3.0Vpp)
• Output impedance: 32 ohm
Plastic

Advertisement

Table of Contents
loading

This manual is also suitable for:

211a210211

Table of Contents