Axis 210A User Manual page 12

AXIS 210A/211A - Accessing the Camera
12
The Live View Page
You may not view all the buttons described below if the Live View page has been
customized.
The Video Format drop-down list allows the video format on the Live View
page to be temporarily changed.
The Output buttons control the
output directly from the Live
View page. These buttons are
configured under Setup > Live
View Config > Layout.
These buttons start and stop the Sequence Mode. This mode is created in
Setup > Live View Config > Sequence mode, and automatically displays the
view from two or more video sources at set intervals.
The Action buttons can trigger an event directly from the Live View page.
These are configured under Setup > Live View Config > Layout.
The Snapshot button saves a snapshot of the video image currently displayed.
Right-click on the video image to save it in JPEG format on your computer.
This button is primarily intended for use when the AMC viewer toolbar is not
available.
From the Source list, select the desired external video source. Note
that Sequence Mode must be stopped before selecting a source from
this list.
Pulse - click this button to activate the
output for a defined period of time, e.g.
switch on a light for 20 seconds.
Active/Inactive - click these buttons to
manually start and stop a connected
device, e.g. switch a light on/off.