Axis 207W User Manual page 33

AXIS 207W/AXIS 207MW - System Options
33
Network - Advanced TCP/IP Settings
DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on your
network.
Obtain DNS server address via DHCP - automatically use the DNS server settings provided
by the DHCP server. Click the View button to see the current settings.
Use the following DNS server address - enter the desired DNS server by specifying the
following:
Domain name - enter the domain(s) to search for the host name used by the AXIS
207W/AXIS 207MW. Multiple domains can be separated by semicolons (;). The host name
is always the first part of a Fully Qualified Domain Name, e.g. myserver is the host name
in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com
is the Domain name.
DNS servers - enter the IP addresses of the primary and secondary DNS servers.
NTP Configuration
Obtain NTP server address via DHCP - check this radio button to automatically look up
and use the NTP server settings as provided by DHCP. Click the View button to see the
current settings.
Use the following NTP server address - to make manual settings, check this radio button
and enter the host name or IP address of the NTP server.
Host Name Configuration
The AXIS 207W/AXIS 207MW can be accessed using a host name, instead of an IP
address. The host name is usually the same as the assigned DNS Name.
For more information, please see the online help .
Link-Local IPv4 Address
This is enabled by default and assigns the camera an additional IPv4 IP address for use
™
. The camera can have both a Link-Local IP address and a static or
with UPnP
DHCP-supplied IP address at the same time - these will not affect each other.
HTTP
The default HTTP port number (80) can be changed to any port within the range
1024-65535. This is useful for e.g. simple security port mapping.
HTTPS
The HTTPS port number. The default is 443.