Avocent DSR Installer/User Manual page 36

30
DSR Installer/User Guide
To access the Devices dialog box:
1. If OSCAR is not open, press Print Screen. The Main dialog box will appear.
2. Click Setup - Devices. The Devices dialog box appears.
NOTE: The Modify button will only be available if a confi gurable switch is selected.
Figure 3.5: Devices Dialog Box
When the DSR discovers a cascade switch, you will notice the numbering
format change from being an ARI port only to [ARI port]-[switch port] to
accommodate each server under that switch.
For example, if a switch is connected to ARI port 6, each server connected to
it would be numbered sequentially. The server using ARI port 6, switch port
1 would be 06- 01, the server using ARI port 6, switch port 2 would be 06- 02
and so on.
To assign a device type:
1. In the Devices dialog box, select the desired port number.
2. Click Modify. The Device Modify dialog box appears.