Avaya Power Over Ethernet Practical Manual page 17

Next, use the show environment power command to check the power consumption status. The bottom
line will show the total available power to the line card, the amount used by the line card and the maximum
wattage allotted to each port on that line card.
Use the command show module to check the status of the PoE line card installed and the daughter card if
applicable. Note the sub-model at the bottom of the display shows the inline power daughter card (WS-
F6K-GE48-AF) installed on the line card (model) WS-X6148-GE-TX. The status should be "OK".
MJK 2006 Avaya Inc. All Rights Reserved. 17
Copyright ©