Freestyle Nomad FS81202 Manual

save the entered data and exit the
setting/viewing mode.
TO SET THE TIME AND
CALENDAR
1. Press S3 button to select TIME
mode.
2. Press S4 button for around 3
NOMAD
seconds.The message "Set-Time"
will be displayed.
3. Press S3 button once, the hour
Model FS81202
digits will blink.
Model FS81203
4. Press S1/S2 button to set the hour
Model FS81204
digits. Holding down the button will
speed up the process.
5. Press S3 button once, the minute
FEATURES:
digits will blink.
• 30 meters H2O
6. Press S1/S2 button to set the
• Day/date/calendar
minute digits.
• Compass with degrees and direction
7. Follow the same pattern to set the
• Barometer with pressure trend
second, year, month, date and hour
• Altimeter with cumulative ascent
and descent
format.
• 99 lap memory chronograph
8. To set the second digits, press S1/S2
• Countdown timer
button to reset the second digits to
• 5 Alarms
00.
• EL backlight
9. To set the hour format, press S1/S2
button to toggle between 12-hour
CONTROL BUTTONS
and 24-hour format. The P.M.
S1 – Start/split Button
indicator may be displayed to
S2 – Stop/reset Button
indicate the time period 12:00 A.M.
S3 – Mode Button
– 11:59 P.M. in 12-hour format.
S4 – Light/adjust Button
10.After finish making all the settings,
press S4 button to confirm.
TO SET NIGHT, CHIME AND BEEP
1. In TIME mode, press S4 button for
around 3 seconds. The message
"Set-Time" will be displayed.
S4 S1
2. Press S1/S2 button to select option
mode. The message "OPTION" will
be displayed.
3. Press S3 button continuously to
select among NIGHT, CHIME or
S3 S2
BEEP mode.
4. Press S1/S2 button to activate or
deactivate each mode.
5. After finish making all the settings,
press S4 button to confirm.
NOTE: When NIGHT mode is activated,
DISPLAY MODES
the NIGHT mode icon
The watch has eight display modes:
The backlight will turn on for 3-5
TIME, COMPASS (COMP), ALTIMETER
seconds when any button is pressed.
(ALTI), BAROMETER (BARO),
NIGHT mode will turn off automatically
CHRONOGRAPH (CHRO), TIMER,
after 8 hours.
ALARM and TEMPERATURE (TEMP).
TO SHOW DUALTIME (T1 OR T2)
To change from one display mode to
another, press S3 button once. The 1. In TIME mode, press and hold S2
button to view T1 or T2 time zone.
mode description will appear for
around 2 seconds before the selected 2. Press and hold S2 button for around
4 seconds to swich to display T1 or
mode is activated.
T2 time zone.
3. Follow the same pattern to toggle
TO USE THE BACKLIGHT
between displaying T1 and T2 time
Press S4 button to turn on the
zones.
backlight for 3-5 seconds.
TO SHOW CALENDAR OR
OTHERS
TEMPERATURE
In any setting/viewing mode, if there
is no key manipulation for around 1- 1. In TIME mode, press and hold S1
button to view calendar or
2 minutes, the watch will automatically
temperature.
2. Press and hold S1 button for 4
seconds to switch to display
calendar or temperature. 4. When the watch is rotated
3. Follow the same pattern to toggle
between temperature and calendar
displays.
TO USE THE COMPASS 5. To interrupt and stop the calibration,
1. Press S3 button to select COMPASS
mode. The direction, degree and
time will be displayed.
6. When the calibration is done, the
NOTE: In COMPASS mode, if there is
no key manipulation for around 30
seconds, the compass sensor will be
deactivated for power saving. Press
S1/S2/S4 button to re-activate the
TO SET THE DECLINATION
compass sensor. If the compass
sensor is deactivated for around 10 ANGLE
minutes, the watch will automatically
1. In COMPASS mode, press and hold
return to TIME mode.
NOTE: This moving dot represents the
2. Press S1/S2 button to select
direction of North (N).
3. Press S3 button, E will blink.
4. Press S1/S2 button to toggle
5. Press S3 button. The declination
6. Press S1/S2 to set the degree from
7. After finish making all the settings,
TO TAKE A NEW "MARK ANGLE"
In COMPASS mode, press S1 button to
take a "mark angle". A new mark will TO USE THE ALTIMETER
blink to indicate the marked direction
1. Press S3 button to select
and a new "mark angle" (in degree)
will be displayed.
2. The latest altitude will be displayed
1. Press S1 button to take another
"mark angle".
2. Press S2 button to return to
TO SET UP THE ALTIMETER
COMPASS mode.
1. In ALTIMETER mode, press and hold
TO SHOW THE LAST "MARK
ANGLE" OR TIME
1. In COMPASS mode, press S2 button 2. Press S1/S2 button to select among
will appear.
to display to display the previous
"mark angle". A mark will blink to
indicate the previously marked
direction and the previous "mark
angle" (in degree) will be displayed. 3. Press S3 button once to enter into
2. Press S2 button again to return to
COMPASS mode.
TO CALIBRATE THE COMPASS 4. In altitude setting mode, press
1. In COMPASS mode, press and hold
S4 for around 3 seconds. The
5. In sea level pressure setting mode,
message "CALIB" will be displayed.
2. Press S3 button to start the
calibration.
6. In units setting mode, press S1/S2
3. When the message "2-TURN" is
displayed, a series of moving dots
will be displayed at the rim of the
7. After finish making all the settings,
display and increase in clockwise
direction. Rotate the watch
horizontally in counter-clockwise
direction in order to freeze the last
moving blinking dot to stay at 12- TO SHOW THE LOG DATE AND
hour position.
TIME
1. In ALTIMETER mode, press S2
completely for 360 degrees, the
button to display log date and time.
message "1-TURN" will be
2. Press S3 button or leave the watch
displayed. Rotate the watch again
idle for 5 seconds to return to
in counter-clockwise direction.
ALTIMETER mode.
press S4 button. The message
TO CLEAR THE DATA
"DISTORT" will be displayed and
1. In ALTIMETER mode, press and hold
the watch will return to COMPASS
S2 button for around 3 seconds to
mode after 3 seconds.
clear all statistic data and graphic
data.
message "DONE" will be displayed
and the watch will return to
NOTE: After clearing the data, the first
COMPASS mode after 2 seconds.
new data will be updated after 2
seconds and another data will be taken
in every 30 minutes.
TO VIEW ALTITUDE AND OTHER
S4 button for around 3 seconds. The
INFORMATION
message "CALIB" will be displayed.
1. In ALTIMETER mode, press S1
button to select displaying the data
declination angle setting mode. The
of accumulative ascent (ASCENT),
message "DECLIN" will be
accumulative descent (DESCENT),
displayed.
difference in altitude (DIFFER), rate
(RATE) or time (TIME).
2. After showing the individual data at
between E (East) & W (West).
the bottom for around 2 seconds,
the data in bar chart (graphic)
angle will blink.
format will be displayed at the top.
0˚ to 90˚.
NOTE: To reset the difference in
altitude to zero, press and hold S1
press S4 button to return to
button for around 3 seconds when the
COMPASS mode.
difference in altitude data is displayed.
TO VIEW DATA IN DETAIL
1. In ALTIMETER mode, press S4
ALTIMETER mode.
button once. The message "VIEW
DATA" will be displayed.
in numeric and graphic formats.
2. After 3 seconds or by pressing
S1/S2 button, the message
"Highest" will be displayed.
3. Press S1 button to select displaying
S4 button for around 1 second. The
the data of highest altitude
message "SET-ALTI" will be
(Highest), lowest altitude (Lowest),
displayed.
accumulative ascent (ASCENT),
accumulative descent (DESCENT),
altitude setting mode (SET-ALTI),
difference in altitude (DIFFER) or
sea level pressure setting mode
the individual statistic and graphic
(SEA-Lv) or units setting mode
data recorded. Press S2 button to
(UNITS).
cycle the selection backward.
4. When displaying highest altitude,
each setting mode. Press S3 button
lowest altitude and the individual
again to return to the mode
statistic and graphic data recorded,
selection screen.
the corresponding log time and date
will be swapping in every 2 seconds.
S1/S2 button to set the altitude
5. Press S3/S4 button or leave the
digits.
watch idle for 1 minute to return to
ALTIMETER mode.
press S1/S2 button to set the sea
level pressure digits.
TO USE THE BAROMETER
1. Press S3 button to select
button to toggle between M (meter)
BAROMETER mode.
and Ft (feet).
2. The latest sea level pressure will
be displayed in numeric and graphic
press S4 button to return to
formats.
ALTIMETER mode.
TO SET UP THE BAROMETER
1. In BAROMETER mode, press and
hold S4 button. The message "Sea
-Lv" will be displayed.
2. Press S1/S2 button to select among
sea level pressure setting mode
(Sea-Lv) or units setting mode
(UNITS).
3. Press S3 button once to enter into
each setting mode. Press S3 button
again to return to the mode
selection screen.
4. In sea level pressure setting mode,
press S1/S2 button to set the sea
level pressure digits.
5. In units setting mode, press S1/S2
button to toggle between blinking
mbar (millibar) and inHg (inch of
Mercury).
6. After finish making all the settings,
press S4 button to return to
BAROMETER mode.
TO SHOW THE LOG DATE AND
TIME
1. In BAROMETER mode, press S2
button to display log date and time.
2. Press S3 button or leave the watch
idle for around 5 seconds to return
to BAROMETER mode.
TO CLEAR THE DATA
1. In BAROMETER mode, press and
hold S2 button for around 3 seconds
to clear all statistic data and graphic
data.
NOTE: After clearing the data, the first
new data will be updated after 2
seconds and another data will be taken
in every hour.
TO VIEW BAROMETER AND
OTHER INFORMATION
1. In BAROMETER mode, press S1
button to select displaying the data
of sea level pressure (SEA-Lv), sea
level pressure change per hour
(dP/dt) or time (TIME).
2. Press S1 button continuously to
view data of Sea level pressure,
dP/dt (sea level pressure change
per hour) and Time.
3. After showing the individual data at
the bottom for around 2 seconds,
the data in trend (graphic) format
will be displayed at the top.
TO VIEW DATA IN DETAIL
1. In BAROMETER mode, press S4
button once. The message "VIEW
DATA" will be displayed.
2. After around 2 seconds or by
pressing S1/S2 button, the message
"MAX" will be displayed.
3. Press S1 button to select displaying
the data of maximum absolute
pressure (MAX), minimum absolute
pressure (MIN) or the statistic and