Freestyle Convert FS81200 Manual

1. Press S3 button to select time mode.
2. Press S2 button to toggle between
HOME TIME and FOREIGN TIME
mode to set.
3. Press and hold S2 button for two
seconds until the "SET" message
appears and the second digits blink.
4. Press S1 button to reset the second
CONVERT
digits to 00.
5. Press S3 button, the minute digits
will blink.
Model FS81200
6. Press S1 button to set the minute
Model FS81201
digits. Holding down the button will
speed up the process.
FEATURES
7. Press S3 button, the hour digits will
• 100 meters H2O
blink.
• Day/date
8. Press S1 button to set the hour
• EL backlight
digits.
• Chronograph
9. Follow the same pattern to set date,
• Pre-set countdown timer
month, day (of the week), hour
• Alarm
format and calendar format.
• Dual time
10.To set the hour format, press S1
button to toggle between 12-hour
CONTROL BUTTONS
and 24-hour format. The P.M.
S1 - Start/stop button
indicator may be displayed to
S2 - Lap/reset button
indicate the time period 12:00A.M.
S3 - Mode button
– 11:59 P.M. in 12-hour format.
S4 - Light button
11.To set the calendar format, press
S1 button to toggle between M-D
(month-date) and D-M (date-month)
format.
12.After finish making all the settings,
S4 S1
press S2 button to confirm.
S3 S2 NOTE: The chosen hour and calendar
formats will apply to both HOME TIME
mode and FOREIGN TIME mode.
NOTE: In FOREIGN TIME settings, only
DISPLAY MODES
minutes, hours, date, month and day
The watch has four display modes:
are open to setting.
HOME TIME (TIME), HOME TIME
ALARM (ALM1), STOPWATCH (STW)
TO SET THE ALARM TIME
and COUNTDOWN TIMER (TMR).
1. Press S3 button to select alarm
mode.
To change from one display mode to
2. Press S2 button to toggle between
another, press S3 button once. The
HOME TIME ALARM and FOREIGN
mode description will appear for 2
TIME ALARM mode to set.
seconds before the selected mode is
3. Press and hold S2 button for two
activated.
seconds until the "SET" message
appears and the minute digits blink.
HOME AND FOREIGN DISPLAY
4. Press S1 button to set the minute
To display FOREIGN TIME, press S2
digits. Holding down the button will
button when HOME TIME is displayed.
speed up the process.
The mode description (TM-2) will
5. Press S3 button, the hour digits will
appear shortly before FOREIGN TIME
blink.
is displayed. To change back to HOME
6. Press S1 button to set the hour
TIME, press S2 button.
digits.
7. After finish making all the settings,
To display the daily FOREIGN TIME
press S2 button to confirm.
ALARM, press S2 button when HOME
TIME ALARM is displayed. The mode
TO TURN ON/OFF THE ALARM
description (ALM2) will appear shortly
AND HOURLY CHIME
before FOREIGN TIME ALARM is
In alarm mode,
displayed. To change back to HOME
1. Press S2 button to toggle between
TIME ALARM, press S2 button.
HOME TIME ALARM and FOREIGN
TIME ALARM mode to set.
TO SET THE TIME AND
2. Press S1 button once to activate the
CALENDAR
alarm. Alarm indicator TO SET THE TIMER
will appear.
1. Press S3 button to select TIMER
3. Press again to activate the hourly mode.
chime. Chime indicator will
2. Press S2 button to alter the timer
appear.
setting among 1, 3, 5, 10, 15, 20, 25,
4. Press the third time to activate both 30, 45 and 60 minutes.
functions. Both of the indicators will
appear.
TO USE THE TIMER
5. Press the fourth time to deactivate
In TIMER mode,
both functions. Both of the
1. Press S1 button to start counting.
indicators will disappear.
2. To stop counting, press S1 button
once. Press S1 button again to
WHEN AN ALARM OR HOURLY
resume from where it left off.
CHIME GOES OFF 3. To reload the TIMER, press S1
button to stop counting and then
A tune will go off by the hour if the
hourly chime function is activated. press S2 button.
4. After reaching zero in a countdown,
a tune will be emitted. To stop the
An alarm tune will be emitted for
around 20 seconds at the designated tune, press any button, the TIMER
will reload automatically.
time when the alarm is activated. To
stop the tune, press any button.
NOTE: You can leave the timer running
while switching over to other operating
TO USE THE STOPWATCH
modes.
1. Press S3 button to select
STOPWATCH mode.
TO USE THE BACKLIGHT
2. The stopwatch will then be displayed
Press S4 button to turn on the backlight
in its current state – reset, running,
or stopped. for around three seconds.
3. To resume a counting, press S1
button to resume from where it left
off.
4. To start a new counting, reset the
stopwatch to zero first.
Press S1 button to stop counting,
then press S2 button to reset
counter to zero.
For the measurement of elapsed time:
In STOPWATCH mode,
1. Press S1 button to start counting.
2. To stop counting, press S1 button
once. Press S1 button again to
resume from where it left off.
3. To reset to zero, press S1 button to
stop counting, then press S2 button
to reset the counter to zero.
For the measurement of split time:
In STOPWATCH mode,
1. Press S1 button to start counting.
2. While the stopwatch is running,
press S2 button once to register a
lap. The stopwatch is still running
in the background.
To display the currently accumulated
time, press S2 button again.
3. Repeat the last step until all the
laps have been registered.
4. To stop counting, press S1 button
once. Press S1 button again to
resume from where it left off.
5. To reset to zero, press S1 button to
stop counting, then press S2 button
to reset the counter to zero.
NOTE: You can leave the stopwatch
running while switching over to other
operating modes.
LIMITED LIFETIME WARRANTY
Freestyle U.S.A. warrants, to the
FOLLOW THESE 8 TIPS TO GET THE
original purchaser, that its watches
are free from defects in materials
MOST OUT OF YOUR NEW WATCH!
and workmanship for the lifetime
of the watch (under normal use)
from date of original purchase.
1. Never pull out the crown or operate
The following are not covered under
the pushers/buttons under water.
warranty: battery, strap/bracelet/
band and crystal.
2. Make sure your crown is returned
to the original position before you
Accidental breakage or damage
expose your watch to water.
due to normal wear or misuse of
the product, including but not limited
3. If your watch is exposed to
to the mathematical accuracy of
saltwater it is very important to
the product, is not covered under
wash it thoroughly under tap water
this warranty. Some states do not
and wipe dry with a soft cloth.
allow limitations on how long an
Keep it clean! implied warranty lasts, or the
exclusions of or limitations on
4. Severe impacts or drops may
consequential damages, so the
affect your watches water
above limitation may not apply to
resistance and performance.
you. This warranty gives you
specific legal rights, and you may
5. Avoid exposing your Freestyle
have other rights, which vary from
watch to extreme temperatures
state to state.
such as in a hot shower, Jacuzzi,
Under this warranty FREESTYLE
sauna or hot tub. The combination
will make any necessary repairs, if
of extreme heat and water may
applicable, at no cost to you the
cause your watch to lose some of
consumer. Any repair needed that
its water resistance.
is not under warranty will be at the
6. Avoid exposing your watch to cost of you the consumer. Proof
of purchase and / or original receipt
chemicals, soaps or solvents as
it needed to validate your warranty.
they deteriorate the water resist
seals in your watch.
Your warranty is voided by any
servicing out by a non-authorized
7. Never try to remove the caseback,
agent. Any other form of guarantee
leave this to a certified watch repair
to you by the retailer is his / her
technician or Freestyle service
responsibility. This warranty applies
center. This will help in preventing
to watches purchased in the United
water leakage from improper
States. For watches purchased
battery replacement.
outside the United States, please
contact you authorized
8. It is advisable to have your watch
FREESTYLE dealer for warranty
pressure tested annually and to
information.
re-furbish your watch every 2-3
years to extend the life of the watch.