Advertisement
Quick Links
HUCKFIN
Model FS81224
Model FS81225
Model FS81226
S4
S3
S1. Start/stop button
S2. Lap/reset button
S3. Mode button
S4. Light button
DISPLAY MODES
The watch has four display modes:
HOME TIME (TIME) / FOREIGN TIME
(TM-2), HOME TIME ALARM (ALM1) /
FOREIGN TIME ALARM (ALM2),
STOPWATCH (STW) and COUNTDOWN
TIMER (TMR).
To change from one display mode to
another, press S3 button once. The
mode description will appear for two
seconds before activating the selected
mode.
NOTE: In any setting mode, if there is
no manipulation for around 60
seconds, the watch will automatically
exit the setting procedure.
HOME AND FOREIGN DISPLAY
To display FOREIGN TIME, press S2
button when HOME TIME is displayed.
The mode description (TM-2) will
appear shortly before FOREIGN TIME
is displayed. To change back to HOME
TIME, press S2 button.
To display the daily FOREIGN TIME
ALARM, press S2 button when HOME
TIME ALARM is displayed. The mode
description (ALM2) will appear shortly
before FOREIGN TIME ALARM is
displayed. To change back to HOME
TRIM
TIME ALARM, press S2 button.
appears and the Minute digits blink.
4. Press S1 button once to increase
TO SET THE TIME AND CALENDAR
the digits by one unit. Holding down
1. Press S3 button to select time
the button will speed up the
mode.
process.
2. Press S2 button to toggle between
5. Press S3 button, the Hour digits will
HOME TIME and FOREIGN TIME
blink.
mode
6. Press S1 button to set the Hour
3. Press and hold S2 button for two
digits.
seconds until the "SET" message
7. After finish making all the settings,
appears and the Second digits blink.
press S2 button to confirm the
4. Press S1 button to reset the Second
settings.
digits to 00.
5. Press S3 button, the Minute digits
TO TURN ON/OFF THE ALARM AND
will blink.
HOURLY CHIME
S1
6. Press S1 button once to increase
In alarm mode,
the digits by one unit. Holding down
1. Press S2 button to toggle between
the button will speed up the
HOME TIME ALARM and FOREIGN
process.
TIME ALARM mode.
7. Press S3 button, the Hour digits will
2. Press S1 button once to activate the
S2
blink.
daily alarm. Alarm indicator
8. Press S1 button to set the Hour
will appear.
digits.
3. Press again to activate the hourly
9. Follow the same pattern to set Date,
chime. Chime indicator
Month, Day (of the week), hour
appear.
format and calendar format.
4. Press the third time to activate both
10.To set the hour format, press S1
functions. Both of the indicators will
button to toggle between 12-hour
appear.
and 24-hour format.
5. Press the fourth time to deactivate
The PM indicator may display to
both functions. Both of the
indicate the time in 12-hour format.
indicators will disappear.
11.To set the calendar format, press
S1 button to toggle between M-D
WHEN AN ALARM OR HOURLY CHIME
(month-date) and D-M (date-month)
GOES OFF
format.
A tune will go off by the hour if the
12.After finish making all the settings,
hourly chime function is activated.
press S2 button to confirm the
settings.
A twenty-second alarm tune will be
emitted at the designated time when
NOTE: The chosen hour and calendar
the alarm is activated. To stop the tune,
formats will apply to both home and
press any button.
foreign settings.
To disable the functions, press S3
TO DISPLAY THE CALENDAR
button to select HOME TIME ALARM
1. Press S3 button to select time
or FOREIGN TIME ALARM mode, then
mode.
press S1 button to turn off the indicator
2. Press S1 button to toggle between
of the function as desired.
time display mode and calendar
display.
TO USE THE STOPWATCH
For the measurement of elapsed time,
Note: Calendar will be displayed for
1. Press S3 button to select
around six seconds before the watch
STOPWATCH mode.
switches back to time display mode.
2. Press S1 button to start counting.
3. To stop counting, press S1 button
TO SET THE ALARM TIME
once. Press S1 button again to
1. Press S3 button to select alarm
resume from where it left off.
mode.
4. To reset to zero, press S1 button to
2. Press S2 button to toggle between
stop counting and then press S2
HOME TIME ALARM and FOREIGN
button.
TIME ALARM mode
3. Press and hold S2 button for two
For the measurement of split time,
seconds until the "SET" message
1. Press S3 button to select
STOPWATCH mode.
2. Press S1 button to start counting.
3. While the STOPWATCH is running,
press S2 button once to register a
lap. The STOPWATCH is still running
in the background.
4. To display the currently accumu-
lated time, press S2 button again.
5. Repeat the last step until all the
laps have been registered.
6. To reset to zero, press S1 button to
stop counting and then press S2
button.
NOTE: You can leave the STOPWATCH
running while switching over to other
operating modes.
NOTE: The STOPWATCH will count up
to 59 minutes and 59.99 seconds
before starting from zero again.
TO SET THE TIMER
will
1. Press S3 button to select TIMER
mode.
2. Press S2 button to alter the timer
setting among 1, 3, 5, 10, 15, 20, 25,
30, 45 and 60 minutes.
TO USE THE TIMER
In TIMER mode,
1. Press S1 button to start counting.
2. To stop counting, press S1 button
once. Press S1 button again to
resume from where it left off.
3. To reset the TIMER, press S1 button
to stop counting and then press S2
button.
4. After reaching zero on a countdown,
a twenty- second beep will be
emitted To stop the beeping, press
any button, the TIMER will reload
automatically.
NOTE: You can leave the TIMER
running while switching over to other
operating modes.
TO USE THE BACKLIGHT
Press S4 button to turn on the
backlight for around three seconds.
To reduce carbon foot print, these
Freestyle instructions are printed with
soy inks on recycled paper.
FS-8122-1049 Huckfin-04
Huckfin IMS V2 18-11-2008
Advertisement
