Preventive Maintenance Checks And Services (Pmcs); Preventive Maintenance Checks And Services Table - ATN PVS-14 Operator's Manual

2.2. PREVENTIVE MAINTENANCE
CHECkS AND SERVICES (PMCS)
2.2.1. PREVENTIVE MAINTENANCE CHECkS AND
SERVICES TABLE
a. General
to ensure the readiness of the MUnVM, perform the preventive
maintenance procedures in accordance with table 2.2., prior to
each mission. preventive maintenance procedures include inspec-
tion, cleaning, and performance of the checkout procedures.
b. Warnings and Cautions
Always observe the WARNINGS and CAUTIONS appearing in the
table. Warnings and cautions appear before applicable procedures.
You must observe the warnings and cautions to prevent serious in-
jury to yourself and others, or to prevent your equipment from being
damaged.
c. Explanation of Table Entries
(1) Item Number Column. numbers in this column are for refer-
ence. When completing Equipment Inspection and Maintenance
Worksheet, include the item number for the check/service indicat-
ing a fault. Item numbers also appear in the order that you must do
checks and services for the intervals listed.
(2) Interval Column. this column tells you when you must do the
procedure in the procedure column. BeFore procedures must be
done before you operate or use the equipment for its intended mis-
sion. DUrInG procedures must be done during the time you are
operating or using the equipment for its intended mission. aFter
procedures must be done immediately after you have operated or
used the equipment.
(3) Location, Check/Service Column. this column provides the
location and the item to be checked or serviced. the item location
is underlined.
(4) Procedure Column. this column gives the procedure you must
do to check or service the item listed in the Check/Service column
2-4