Keys Used In Key Operator Programs - Sharp AR-M237 Key Operator's Manual

KEYS USED IN KEY OPERATOR PROGRAMS

Example: Auditing mode
KEY OPERATOR PROGRAMS
ACCOUNT CONTROL
1
AUDITING MODE
2
TOTAL PAGES PER ACCOUNT
When a checkbox (
1
This indicates that the setting is enabled. If a checkbox with a checkmark (
cleared ( ) and the setting is disabled.
When a key that appears in the form
2
If the settings continue on the following screen(s), touch the
3
screens. To return to the category selection screen, touch the [OK] key.
The currently set numerical value is displayed.
4
Numerical values can be set by touching the
5
RESETTING ACCOUNT
) appears in front of a setting, a checkmark (
X X X
USING THE KEY OPERATOR PROGRAMS
OK
1/3
) will appear when the checkbox is touched.
is touched, the setting screen of that key will appear.
and keys to move back and forth through the
and keys.
The following keys appear in screens that
require the entry of numerical values.
20
(1 999)
3
4 5
) is touched, the checkmark is
3