Ext. Vol Limit - Pioneer XW-NAC3-K Operating Instructions Manual

Digital speaker system for ipod
Hide thumbs Also See for XW-NAC3-K:
Table of Contents

Advertisement

Available languages

Available languages

05
Playback with HOME MEDIA GALLERY inputs
1
Select 'Information' and press ENTER to
confirm your selection.
The Firmware Version (for the Home Media
Gallery of this unit) screen appears.
2
Check the network settings.
Press / to switch the display. Each time
you press /, the display switches as
follows.
Firmware Ver.  MAC Address  IP
Address  Gateway IP  Proxy Server
 Subnet Mask
3
Press RETURN.
The Setup screen appears. To return to the Top
Menu screen, press RETURN again.
Note
1 Refer to Enjoying the Home Media Gallery on page 21.
30
En

Ext. Vol Limit

"Ext. Vol Limit" controls the maximum value
when adjusting the sound volume from an
external controller (Digital Media Controller
(DMC)). The maximum of volume is changed
from '50' into '30'.
Important
• When Home Media Gallery function is
selected and both the iPod/iPhone
connector ports is not connected, Ext. Vol
Limit works.
1
Press HOME MEDIA GALLERY.
2
Disconnect iPod/iPhone units from the
iPod/iPhone connector ports.
, and then  STANDBY/ON for
3
Press
three seconds to switch Ext. Vol Limit
between on and off.
When Ext. Vol Limit is on, 'Ext. Vol Limit On' is
displayed on this unit's display.
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xw-nac3-rXw-nac3-w

Table of Contents