Getting Started - Pioneer Elite X-SMC4-K Operating Instructions Manual

04

Getting started

Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1 Press STANDBY/ON.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup
(page 30).
2 Cancel Demo Mode (Set to normal mode).
The screen below will automatically appear after the screen in
step 1. If the  STOP is pressed, the operation will proceed to
step 3.
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY]
[STOP]
• Press  PLAY button to start the Demo Mode. When
starting up the next time, it will be necessary to set step
3.
• When Demo Mode is selected, the Quick Start Mode
is simultaneously set to On.
14
En
Start
Cancel
• The Demo Mode and Quick Start Mode settings can
also be changed manually in the Option Settings (see
page 30). When Demo Mode is set in step 2, if the
Option Settings menu is subsequently used to cancel
the Demo Mode, the Quick Start Mode will not be
cancelled simultaneously. The two settings must be
changed independently.
Use / to select the menu language of this
3
unit, then press ENTER.
Language
English
Français
Deutsch
Nederlands
The setting is done.