Setting The Am Tuning Step; Switching The Warning Tone; Switching The Auxiliary Setting; Setting The Av Input - Pioneer DVH-P6050UB Operational Manual

Operating this unit

Setting the AM tuning step

The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1 602 kHz allowable) to 10 kHz (530 kHz
to 1 640 kHz allowable).
1 Use MULTI-CONTROL to select
AM STEP.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to select the AM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the AM tuning step between 9 kHz and
10 kHz. The selected AM tuning step will ap-
pear in the display.

Switching the warning tone

If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Use MULTI-CONTROL to select
WARNING.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to turn warning
tone on.
# To turn warning tone off, press
MULTI-CONTROL again.

Switching the auxiliary setting

Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on page 53.
Switching the auxiliary 1 setting
1 Use MULTI-CONTROL to select AUX1.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to select desired
setting.
! VIDEO – an iPod with video capabilities
connected with 4-pole mini plug cable (e.g.,
CD-V150M)
! AUDIO – auxiliary device connected with
stereo mini plug cable
! OFF – No auxiliary device is connected
Switching the auxiliary 2 setting
1 Use MULTI-CONTROL to select AUX2.
Refer to Adjusting initial settings on the pre-
vious page.
2 Press MULTI-CONTROL to turn AUX2
on.
# To turn AUX2 off, press MULTI-CONTROL
again.

Setting the AV input

You can connect AV components to the AV
input with an RCA cable.
Switch the AV input setting according to the
connected AV component.
For more details, refer to the installation man-
ual.
! Select TV to watch video of a TV tuner as
TELEVISION source.
! Select DVD to watch video of a connected
DVD player as S-DVD source.
! Select EXT-V to watch video of a connected
video unit as EXT source.
Section
02
49
En