Table of Contents
Advertisement
Section
Operating this unit
02
1
Press DIRECT.
2
Press 0 to 9 to input the desired num-
ber.
# To cancel the inputted numbers, press CLEAR.
3
Press DIRECT.
This starts playback from the selected part.
# After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
Note
With discs featuring a menu, you can also press
MENU or TOP MENU and then make selections
from the displayed menu.
Changing audio language
during playback (Multi-audio)
DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
audio recordings, you can switch between lan-
guages/audio systems during playback.
! This function is available for DVD and DivX
disc.
1
Press 4/AUDIO during playback.
The audio selection icon
eight seconds.
2
Press 4/AUDIO while the audio selec-
tion icon is displayed.
The audio changes each time you press 4/
AUDIO.
Notes
! You can also perform this operation by press-
ing AUDIO on the remote control.
! With some DVDs, switching between lan-
guages/audio systems may only be possible
using a menu display.
! You can also switch between languages/audio
systems using DVD setup menu. For details,
refer to Setting the audio language on page 30.
! Only digital output of DTS audio is possible. If
this unit's optical digital outputs are not con-
18
En
! Display indications such as Dolby D and Mch
! Performing this operation during fast forward/
Changing the subtitle language
during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings,
you can switch between subtitle languages
during playback.
! This function is available for DVD and DivX
1
The subtitle selection icon
eight seconds.
2
tle selection icon is displayed.
The subtitle language changes each time you
press 5/
is displayed for
! You can also perform this operation by press-
! With some DVDs, switching between subtitle
! You can also switch between subtitle lan-
! Performing this operation during fast forward/
nected, DTS audio will not be output, so select
an audio setting other than DTS.
indicate the audio system recorded on the
DVD. Depending on the setting, playback may
not be with the same audio system as that in-
dicated.
fast reverse, pause or slow motion playback
returns you to normal playback.
disc.
Press 5/
/SUB TITLE during playback.
Press 5/
/SUB TITLE while the subti-
/SUB TITLE.
Notes
ing SUBTITLE on the remote control.
languages may only be possible using a menu
display.
guages using DVD setup menu. For details,
refer to Setting the subtitle language on page
30.
fast reverse, pause or slow motion playback
returns you to normal playback.
CRB2941-A/N
<
is displayed for
>18
Advertisement
Table of Contents
