Listening To Messages - Panasonic KX-TM150ALB Operating Instructions Manual

Digital answering system, caller id compatibility
Table of Contents

Advertisement

PQQX12356ZA-BM 01.3.22 3:56 PM y [ W 14
" Automatic Answering Operation
≥If you do not want the unit to answer calls, press
turn off the answering system. The ANSWER indicator light goes out and
"Answer off" is heard.
≥You can also turn on the answering system remotely using any other
phone (p. 29).
Monitoring incoming calls
While a call is being recorded, you can monitor it through the speaker.
To answer the call, lift the handset of the telephone connected to the same
line. The unit stops recording.
≥You can adjust the volume by pressing VOLUME/SEARCH
(^)
(_)
or
.
≥If the answering machine does not stop recording when you lift the
(STOP)
handset, press
.
≥KX-TM150ALB will not answer incoming calls on your FaxAbility number
(New Zealand only).
14
(ANSWER–ON)
again to

Listening to Messages

You can see the total number of recorded messages on the display. If the
ANSWER indicator flashes, new messages have been recorded.
Listening to only new messages
(NEW\MESSAGE)
Press
briefly.
≥The unit announces the number of new messages and plays them back.
≥If there are no new messages, "No new messages" is heard.
Listening to all recorded messages
(NEW\MESSAGE)
Press and hold
until a short beep sounds.
≥If there are no messages, "No messages" is heard.
To adjust the speaker volume (9 levels):
While using the answering system, press VOLUME/SEARCH (^) or (_).
≥The display shows the volume level.
(STOP)
(NEW\MESSAGE)
(SKIP/FF)
(REPEAT/REW)
"
(^)
(_)
VOLUME/SEARCH
,
15

Advertisement

Table of Contents
loading

Table of Contents