Before Requesting Help - Panasonic KX-TM150ALB Operating Instructions Manual

Digital answering system, caller id compatibility
Table of Contents

Advertisement

PQQX12356ZA-BM 01.3.22 3:56 PM y [ W 30

Before Requesting Help

Problem
The unit does not work.
You cannot program function
items, such as the dialling
mode.
While programming or
searching, a telephone
connected to the same line
starts to ring and stops the
program/search.
The unit does not display the
caller's phone number whose
message is being played.
The display goes to the
stand-by mode while viewing
the Caller List.
During message playback or
monitoring a call, no sound is
heard.
Previously programmed
information is erased.
The answering system is on,
but incoming messages are
not recorded.
"Message full" is
displayed, the ANSWER
indicator flashes rapidly, and
no new messages are
recorded.
30
Remedy
≥Check the settings (p. 7–12).
≥Unplug the AC adaptor to reset.
Plug in and try again.
≥Do not pause for over 60 seconds
while programming.
≥To answer the call, lift the handset.
Start again from the beginning after
hanging up.
≥If the caller is not stored in the Caller
List, the unit will not display the caller's
information.
≥Do not pause for over 60 seconds
while searching.
(^)
≥Press VOLUME/SEARCH
to
increase volume.
≥If a power failure occurs, programmed
information may be erased.
Reprogram if necessary.
≥Memory is full. Erase some, or all, of
the messages (p. 17).
≥Memory is full. Erase some, or all, of
the messages (p. 17).
Problem
You cannot operate the
≥Make sure to enter the correct remote
answering system from a
code.
touch tone phone.
≥The answering system may not
respond if the tones are too short to
activate the unit. Press each button
firmly.
≥The answering system is off. Turn it
on (p. 29).
While recording a greeting
≥To answer the call, lift the handset.
message, a telephone
The recording will stop. Start again
connected to the same line
from the beginning after hanging up.
starts to ring and stops
recording.
During playback, a telephone
≥To answer the call, lift the handset.
connected to the same line
To resume playback, press
(NEW\MESSAGE)
starts to ring and stops
playback.
Remedy
after hanging up.
31

Advertisement

Table of Contents
loading

Table of Contents